Chris141084

^ I agree, a pain to have to cut and rejoin, but nothing to worry about. I've had to cut the plugs out of my passenger seat, it kept throwing a fault up due to a bad connection

Looks like someone has previously cut out the plugs and hard wired the airbag in

Pm'd you :-)

Not that much really, the plugs for the electric seats should already be there, so the movement part is plug and play. But you would need to buy switches and the wiring loom for them, then you will need to run a feed to the switches to power them up. Shouldn't take more than a couple of hours to do the whole job :-)

Interested in one pair, but holiday coming up in a couple of weeks, no spare cash until after that :-(

It'll be the loom for the hazard switch etc, between the seats, but he'll need one from a gt with heated seats in, as it will have the extra plugs

What make are these?

All parts now sold, please lock

These resets did the trick, she's running perfectly now :-)

Cheers guys, I'll try it in the morning :-)

I've just serviced my 04 De and changed the spark plugs for iridium ones. While I'd got the inlet pipe off I thought I'd clean out my throttle valve, now my tick over is higher 1000 rpm, and when gearing down to stop at lights etc the revs stick at 1100 ish for a few seconds then drop down again. Once the engine is warm and has driven a few miles it seems to tick over fine. Thought there might be some kind of throttle valve reset procedure?

OK, bronze is growing on me. Think I'd need to see them on my car to decide.

You've read it wrong mate, I don't want black. Silver or polished would be ideal :-)

Black wheels on an orange Z does look good, but it's been done loads, wanting to do something slightly different.

They are nice, not sure about bronze wheels on an orange car?

I could :-) no harm in seeing what's about tho.

For a 350, might have been helpful to have said

I'm after some 18 or 19 inch wheels, preferably with a bit of a dish. Budget is £1000 ish, nothing black, silver or polished ideally. I'm in no rush, just want to know what's about

Or does he mean off side?

Hi Nick, No problems fitting it, even wired up the tweeters while the door card was off. Was nice to meet you both. I'll give you a shout if I need anything else :-)

Picked up a window yesterday, fitted it today, no more scratches!!!

Thanks for the advice guys, they were vertical but really bad. Just bought a security nd hand window, should be able to see through this one :-)

Can anyone recommend a good glass scratch removal product/method for deep ish scratches?

Yes. That's what I've done with mine. It's really easy to wire the heaters up if you can get hold of the switches and loom

I've got a japspeed k2 I've just taken off mine. The tips will need cleaning up, but the visible part of the silencer has no corrosion on it