-
Posts
209 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by cov350z
-
-
so ive been away busy over the xmas break and been getting things done .
first up was to begin my full car wrap so what better way than to start at the front
bumper off
so i took it off into my nice warm house to do the work
then fitted back on to car minus the badge misplaced my double-sided tape so had to order some more
-
He was a visionary who would of thought that 10 years later everyman and his dog would be getting it done 😉
-
Although far from professional i have found the carbon look stuff some of the worst to use because it is so thick and seems to lift regardless, good luck with the rest, but i would remove the a pillar to get it looking right if i were you.
yeap the carbon stuff is really bad 3m don't make coloured textured vinyl because of this it has a tendency to rip along the pattern so is a nightmare to work with but i havent seen a whole car in it so wanted to be different
as for being professional im far from it loads of mistakes and marks on it but im going to be tracking the car so its going to probably need redoing various times also my first time wrapping one panel let alone a whole car so im getting better as i go along
-
Wow dude that looks awesome so far, can't wait to see the end product
thanks should be done in next week or two keep an eye on my build thread http://www.350z-uk.com/topic/102783-zena-the-warrior-princess/
That looks really good. How the hell do you took it around the panels?
What seats are those?
just by doing each panel on their own and removing some of the other panels like front bumper and side skirts
there omp tr-s got mine from here good seats for the money,
http://www.demon-tweeks.co.uk/top-100/motorsport-top-100/omp-tr-s-steel-frame-seat
- 1
-
Hi guys thanks for all.this all . useful but have read done most of this. The question I'm after is do I need to remove the black rubber bits that sit over the roof so I can get a wrap around the plastic then put them back on or can I get away with just cutting up to edge I did a test run of the latta and it lifted after a day out in the rain. Guessing water got in edge and wind did the rest. I have managed to wrap the front bumper and front fenders bonnet roof and side skirts just this is my next section lol
Im guessing that you've answered your own question there.
i guess i have but as with anything new your always second guessing if your doing it right
that's were you guys come in to bounce ideas over
-
-
-
Hi guys thanks for all.this all . useful but have read done most of this. The question I'm after is do I need to remove the black rubber bits that sit over the roof so I can get a wrap around the plastic then put them back on or can I get away with just cutting up to edge I did a test run of the latta and it lifted after a day out in the rain. Guessing water got in edge and wind did the rest. I have managed to wrap the front bumper and front fenders bonnet roof and side skirts just this is my next section lol
-
anybody self wrapped there car(350z) ?
want some advise on how to wrap the bit above the doors
did you remove all the rubber trim seals? or just cut right up to them ?
i tried cutting right up to it and using a card to push the vinyl in but it just lifted?
was thinking of using a spray adhesive to give extra grip
any ideas welcome
-
all legit use of car park aswel guys organizers speak with owners and also let the local police know so no hassel as long as people dont d**k about
-
its in the new sainsburys car park in the little industrial park on loxley road CV35 9JY
-
Be good to catch up with you vlad done abit more to car since I got the seat rails off you lol
No problem dave would of put it up sooner but wasn't sure of my plans either.
Sorry don't know your name 312 but you should pop by there's always a good mix of ppl and cars at these meets
-
Sorry edited op as link didn't add. Static meet for local car club
-
going this with a few mates anybody fancy it from here ? just at industrial park at welsborne airfield cv35 9jy starts at 6pm https://m.facebook.com/events/1031837623534026?ref=bookmarks&_ft_=qid.6232900199786314271%3Amf_story_key.1042335325817589%3Atl_objid.1042335325817589
- 1
-
I've noticed a difference in light but my old bulbs were charred quite a bit so was dimming have the light. But I can now see I have headlights on driving down a lit road so I guess there about 10/15% brighter I'd say
-
just some ebay ones i seen someone used on here
only £10 for the pair cant complain not sure on if they'll last but at a 10a i can afford to change them 10 times before i meet the cost of so called high quality ones at £50 each
-
just seen this can i have an add please
coventry
james
- 1
-
so i upgraded my headlight bulb to 6000k as i couldnt tell if my lights were on or off with the bulbs that were in there driving around town
bulbs are great see my thread for pics
http://www.350z-uk.com/topic/102783-zena-the-warrior-princess/
but i had a right ball ache doing it. those arch liners really dont want to come off do they and not easy to get to bolts/pins. i was lazy and didn't fancy jacking the car up so just done it while on the floor next time i will defiantly be putting it up in the air.
bruised nuckles and cuts all over but please with the end result so its all good
this is why we do things are self isnt it. suffer the pain to get the reward of doing it ourselves
- 1
-
-
-
We're you Zeds get to park in I'm in carpark opposite main one
-
-
^^ you need a cordless drill and a couple of cable ties will.do the trick
-
ill be heading down from coventry with a few of my friends depending on times i may pop over to ur pre meet spot ill keep yous posted on this thread
zena the warrior princess (updated 05/04/16) stage one complete
in Member Build Projects
Posted
next up the wings
bumper off again
headlights removed
side skirts aswel
finished up ( no during as was very time consuming and re wrapped it 3 or 4 times as i kept ripping it as nearing the end