Jump to content

cov350z

Members
  • Posts

    209
  • Joined

  • Last visited

Posts posted by cov350z

  1. Nice car mate. Iv just replaced the diff bushing on mine with whiteline bushes. Good luck :)

     

    how much of a pain is the diff bush to do?

     

    that wrap looks cheap :doh:...can see the bubbles and cuts,easier to respray yourself using some cans ... look at others that did this as it is quite simple

     

    the center console needs redoing loads wrong with it but doing a tablet install on it next month this was just to see how the colours went in the car so i agree the wrap does look cheap and shoddy lol

    • Like 1
  2. so just got my first zed and im in love but as this project is something ive wanted to do for over a year i have plans to change it into something else. zeditus is truly addictive i had even brought things before the car was found.

     

    right so the base of this project is the car, after loads of reading and looking about this and other forums i set my self a 5k budget for a early zed. Not alot of money but it is a project car after all so aslong as it was mechanically sound and body panels straight i wasnt to fussed about paint quality,

     

    so i found a local ish car in my budget and went to view. car had done 90k full service history and had been looked after by cs for last few years so it looked promising. Gm gray/silver tan interior (not to my liking but its going anyway) just had a service and looks to be in reasonable nick

    8d4dcef4-242f-486f-a9dd-b21fa8fa5da9_zpsydrxuzrx.jpg

     

     

    it drove well and ticked most of my boxes so i done the worse thing you can do when buying a car and brought my first one i seen :p

     

    now at 4900 it isnt without its fault and a few jobs could be bigish things but im mechanically minded and a trained engineer so i can fix most things myself

     

    problems;

     

    it has a bad case of bonnet paint flake on the front end2fad11e0-4ea7-4217-afe0-8b6b425a7f72_zps3gzaznq0.jpg

     

    and a few paint bubbles starting to appear around the arches

    tracking is out on front wheels

    needs new brake pads on front) (done) ebc yellow stuff pads from cs 20151111_124110_zpsdllelpm0.jpg 20151111_124118_zpsanmfwutm.jpg

    clutch is getting heavy but no slip just yet ( so new one in new year)

    and this is the big one rear diff bush is leaking and needs to be replaced

    also the underside is corroding away (looks pretty bad but need to get on a ramp to asses what needs attention asap and what is just cosmetic

    320494bd-aada-4f58-b2b6-c5dfc1f1ee00_zps79mrcswm.jpg

    a8b06b96-5675-41bd-923f-0b316cb3f7ee_zpscrybr0bv.jpg

     

    20151021_123043_zpslqmsznew.jpg

     

     

     

    right so thats the car now onto the planned mods list

     

    exterior;

     

    first im going to wrap the car (myself) in a red carbon effect

    gt style front lip (carbon wrapped in black carbon)

    nismo v1 side skirts (in cf wrap black)

    ts style rear diffuser

    nismo rear spats (in cf wrap black)

    rt gtrz rear wing

     

    engine:

    change exhuast front the japspeed k2 cat back to a k4(hks rep) decats and maybe a new manifold

    jwt pop charger

    plenum spacer

    once all done a trip to abby for a uprev :p

     

    interior;

     

    more wrapping here

    center dash in red (done)

    20151021_122407_zpsupyx1f9g.jpg

     

    door switch panels in red (done)

    20151021_122359_zpsudjj6pjw.jpg

    20151021_122347_zpsuie5s9fi.jpg

     

    rear strut bar zed panel in red with cf z(done)20151023_113820_zpsegwrnpsm.jpg

    B pillers in cf 20151111_150736_zpstbylkphp.jpg

    20151111_151139_zpsre3ary7m.jpg

    20151111_151147_zpsgnyqmoa9.jpg

    20151111_151158_zpssdpkozt2.jpg

     

    new steering wheel

    new gear stick and hand brake gaiters

    new gear knob and handbrake lever

    tablet install in nav hole

    new double din head unit

    bucket seats omp trs (done)

    seats%203_zpsikjyzbwd.jpg

    seats%205_zpsv1ojtfwr.jpg

    seats7_zpsxwqkn5ix.jpg

    seats8_zpswvkei5he.jpg

    seats9_zpsghvasg2g.jpg

    buddy club rails.(Done) thanks Vlad for these saved me £150

    harness bar ( gc fabrications seems only option atm)

    omp 4 point harnesses

     

    ill add more pictures and updates as i complete hoping to be ready for Easter ready for show season to start B)

  3. hi all

     

    This is my first post after ive been reading through the forums for a few months now. ive been thinking about getting a zed for about a year now and after reading up every last bit of information on here (i have a lot of spare time on my hands and i needed it), planned all the mods i would like to do and seen some events i would like to attend next year i think im finally going to bite the bullet and get a car :p

     

    truthfully ive been waiting for the finances to come in and now there at the right level for me im like a kid at xmas.

     

    so im going to ask my first (of many most probably) bit of advise

     

     

    what things should i look out for when going on the test drive of the z

     

    im looking at older DE 03-04 models with highish mileage

     

    from what i have read the only thing that should be an issue is the clutch starting to go if they haven't changed it from new, any other niggles ?

     

    you all seem to know so much about these cars that i feel you'd look after a new guy

     

    thanks

    james

     

    so i got one heres the build thread ive started lots of pics

    http://www.350z-uk.com/topic/102783-zena-the-warrior-princess/

×
×
  • Create New...