smijay

Hi people, 04 UK 350z key fob stopped working this afternoon, have changed the battery and still nothing! Manually locks / unlocks fine via the door slot but alarm goes off until ignition is turned on. Will not lock or unlock remotely (so it can't be the buttons themselves) any common issues or easy / not overly expensive replacement fob options anyone knows of? Thanks in advance!

Got the guy to chop off the old flexi and weld on a new one and it flew through emissions with no problems Good suggestion though i'll have a look for these braces you speak of!

Hi guys, had my 350 in for its MOT yesterday... all fine apart from it failed on the lambda test reading. The mechanic said that he tested for 15 minutes straight and the lambda reading was just fluctuating everywhere. Upon investigation I've found that the flexi on the passenger side of the cobra Y pipe looks like its been scraping on speed bumps and is basically shot and leaking exhaust gasses. Has anyone else had problems like this? And has anyone got any ideas how I can stop this from happening again? The only thing that comes to mind is mount some kind of metal plate over the flexi to stop bumps hammering it! Thanks in advance!

Thanks for the suggestion stu ill look grinspeed up, only 30 mins away from me!

Yeah my first thought was that they probably just cant be arsed doing it... but the garage in question are supposedly a 'reputable' and well reccomended garage on these forums! I dont mind paying to have a professional job done I just refuse to be ripped off and charged double

Hi all, Can anyone reccomend a garage in the north west who wont rip me off for a clutch + flywheel replacement (labour only) on my 350? I wont name any names but I recently got a quote from a garage I have used before who are fairly local to me and was quoted £570... Seems very steep to me! Any help / suggestions would be appreciated! Jay

After a new gear knob, got my heart set on the black Nismo knob part number C2865-1EA01 https://goo.gl/images/CX5JJy Anywhere in the UK that stocks these? I've had a good search and the only ones I can find are either in Japan or USA!

Just want to say a big thanks to Ian for the plenum spacer! These are cheaper than any other decent spacers out there (cheap crappy plastic ebay spacers dont count) It fitted perfectly and was a fairly straightforward install with the correct tools, also looks amazing and shiny! Ian himself is a credit to this forum, he'll always get back to you really quickly if you have any questions and has the patience of a saint! Really knows his stuff! Thanks again Ian

SOLD!

SOLD!

Oops - double post

Hey, yeah! Bought them off you guys but my dad already had ordered me a pair elsewhere and had them put away as a 'surprise present' The look on his face was good though when i showed him the set i bought off you guys without him knowing... Oops... but as far as 'presents' go these are amazing Thanks!

Revised to £330 as they are taking up space in garage, no offers

Im the guy selling them purchased from torquen myself around 2 weeks ago now, reduced to £330 to get them gone outta my garage! At this price, these wont be around for long

http://pages.ebay.com/link/?nav=item.view&id=151750394415&alt=web http://www.ebay.com/itm/151750394415 You're welcome

Haha yeah, based on what i saw on the back side of the TB I would NOT recommend just squirting the stuff up there, anyone thinking about doing this... do it properly by taking the TB off! Berk high flow cats courtesy of TORQUEN sat in the garage next to the wasso plenum spacer both waiting to be installed! Cobra sport y pipe and cat back should be delivered tomorrow! Rang TDI north west to get booked in for the uprev, they said the earliest slot they had was at the very end of august and i hate waiting for stuff! -.-

Aaaaaaand the points go to... Gudzy and ChrisB! Disconnected negative terminal from battery Removed throttle body (PITA but doable) Ceaned the throttle body with wynn's carb and intake cleaner (the back side of the TB was wayy worse than the front!) I gave it a good scrub with a micro firbe cloth and carefully moved the butterfly valve to clean the carbon from around where the butterfly sits when closed Cleaned the inside of where the throttle body sits on the actual plenum Binned microfibre cloths (they where BLACK) Gave the TB 15 mins to dry naturally and then put it all back together Performed every single pedal dance that i could find out there! Went for a good 15 minute drive so the car warmed up, got it home, turned engine off... tyrned engine on... IT LIVES! Started first time and idled around 1k RPM (I believe this is normal while the ECU is in learning mode) I've tested it a few times from hot and looking good so far! Thanks again everyone for your input!

Carb cleaner... got it... ill give it a go and update when i've had the chance!

Thanks for the ideas! Got a plenum spacer from wazzo to fit so may as well fit that while im working in that area anyway... When i took the air intake hose off the throttle body i did notice a black sooty build up but thought nothing of it! Just strange how this would happen literally a day after changing all sorts -.- Whats the best thing to clean the throttle body with? Thanks again

Installed the old air box and the same problem is happening, the engine wont idle when it's started from warm unless i apply some accelarator then it idles fine -.- Booked in at my garage on monday for them to have a look. I've got a sneaky suspicion that its an ignition coil from the research i've done so far and maybe iv damaged one when i've been changing the plugs? Will update on monday!

Update: Ok so i took the pop charger off and cleaned the MAF with some WD40 and a cotton bud, put it all back together and it started first time! (engine had been standing for an hour so had cooled) Took it for a good 15 minute drive so everything warmed up, got it back home turned off / on the engine and the same thing happened again -.- the engine fires but just wont idle! Ill try the old air box back in tomorrow and see how that is... Any other suggestions in the mean time?

Thanks for the suggestions, i was really careful to check all wires and make sure they all went back in, just had another check now and everything that i've taken out is back in properly. Zeus could you suggest anything that i could clean the MAF with?