Jump to content

hairyman68

Members
  • Posts

    253
  • Joined

  • Last visited

Posts posted by hairyman68

  1. Grumpy,

    I bought Alpine as listed above. Sure there 6.5" . The link is just a small piece of cable (speaker type twin). It runs from the speaker itself and out of the old cable plug (removed so you can thread the link through it) and then connect to the original cables. ...? That make anymore sense..?

  2. Gumpy, just lifted the speaker grill off to allow access and pulled the bottom of the door off the little plastic clips. Then 3 screws , 2 off which you can unscrew with a screwdriver and the lower one I used a 10mm ratchet as the screws have a hex head 10mm. Then disconnect the white cable clip on top and carefully pass the speaker between the door frame and door skin, ie out the bottom of the door. I cut the old ones out with cable cutters to leave just the out frame. Remove the white cable mount. The new speaker then mounted onto the ring with just 3 screws. Then make a short cable link up to allow you to attach to the speaker and then cable out of the hole in the top of the frame (where the white bit was). You can then re mount the speaker the same way it came out and use the link wire and 2 bullet connectors to reconnect the speaker. No have not upgraded the cable. Can see no need . Sounds great as is. New pioneer head unit going into tomorrow. But not sure how to access the rears for their upgrade.

    Hope that makes some sense. If not message me for any help....

  3. Hi guys looking to sort new wheels out Tomorrow.

    Have new 18" tyres. 225 and 245 . New wheels are 8 or 9" . I know Nissan rays are 8 and 8.5 . Do I stay all 4 x 8" or go 9" on rear but then wheels won't be swappable...?

    Cheers.

  4. I've had my roadster for 3mths... Love it... Just fitted new roof but had budgeted for that. But you can't beat the noise of my cobra exhaust with the roof open.... No issues on A or B roads.. Just down to what you want....

×
×
  • Create New...