saint
-
Posts
286 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by saint
-
-
Mine was 500, but I think the sellers dropped a clanger and I went for it! I bet I could sell it to fund a turbo, irony...
-
I'm looking for the folding cup holder for the passenger side dashboard to fit a DE 350Z (the one that folds out when you press it). If anyone knows how to fit them feel free to give me pointers via PM seeing as that's definitely the next issue once I have one...
-
Dont do what I did, getting a plate that says BOOST next to your initials! That plates cost me a future turbo!
- 2
-
Forgive the noob question, I need to drop my exhaust around 3-4 inches to make it look "right" on my amuse rear bumper, whats the best way to go about it? I guess that's too big to just adjust the hangers?
-
I'm going to try on Friday, this is all to fit a veilside v3 spoiler in the car...
-
-
I followed the guides on passenger seat removal, but there's an air bag in my seat and it has an extra cable compared to what the guides all show. It branches off from the seat control cable and goes all the way inside the seat up to the air bag. How do I continue?
-
If you can show me the chips on the bonnet I might call dibs! And I'll kindly donate something too
-
I bought it 2nd hand from on here, so no. I'm pretty sure the seller knew there was a problem waiting to happen...
Have you contacted Milltek about it? How are they to know you're not the first owner? Not that it should make any difference anyway, lifetime should be lifetime.
They take the serial number and cross reference it with the dealership that sold the unit. They do however say I can pay them for repairs. Like I have £600 quid for ANOTHER friggin back box... I'm starting to get fed up of my luck.
-
If you are NOT the original purchaser of the system (purchased second-hand or was fitted to your car when purchased)
All Milltek Sport products are covered by a Limited Warranty which applies only to the original purchaser of the product or part(s) only and is not transferrable to a new owner. In this instance, replacement parts can be purchased from or repairs may be carried out by an authorised Milltek Sport dealer. The owner of the product or part(s) will be liable for all costs incurred as a result
Poo....
-
I bought it 2nd hand from on here, so no. I'm pretty sure the seller knew there was a problem waiting to happen...
-
For some reason Milltek put baffle tubes in the tips themselves, it fits in with a ring shaped disc and then the baffles are just tubes. I inspected the buzzing one and half of its actually missing.... so maybe the best is to try removing the whole insert?
-
The baffles in the tips of my milltek have corroded and are buzzing against the outer sleeve of the tips. Can the baffles be either replaced or removed?
-
I'll be along for once!! Sorry about advertising it then going AWOL, these Sunday's have been bad luck for me! See you there!!
-
Does anyone know a good place to get my body kit parts sprayed and fitted? I used KP Smartpaint before but they've gone awol, shame as they were terrific
-
I've got a broken DFGT and nowhere to mount it! The pins are broke from trying to force it onto a cumbersome table, and I'd have to go buy a TV since I'm playing on a massssive projector screen. I guess that helps slightly, can see the corners real big
-
Wanted:
door vent insert (circular one, they are non handed so either side)
Cubby door
Both for DE 350Z
-
Did you try changing the weight distribution? I found a second in the final sector at the expense of the first long left/right turn, but I don't think the perfect balance would be worth much more than what I left on the table
-
I'd be interested to see what a 1:05.x looks like at Roma, my best would be 1.06.0 if I nail all 3 sectors
-
These lap times are beyond me, really wondering if I need a wheel now. Anyone care to share data logger traces? I just cant accept theres 2 seconds to be found at Roma, I was on every apex and carried as much speed out of each corner as the front wheels could handle.
-
I'll take it, pm incoming
-
Dammit, went to tdi north and they never offered me pops n bangs
-
Same happened to me at a shell garage!
-
flat or tapered bottom?
struts for a v3 wing?
in Styling
Posted
Can anyone with a Veilside v3 wing share what struts they used? I daresay its a lot heavier than a Nismo V2, so I dont want to just blindly go for SGS' uprated ones. I reckon theirs can support 20kg of weight (for a pair) but if someone else went through the pain of trying then its worth knowing