cearnshaw85

great shots

watch AMMO on youtube on how to apply and sand down to give a perfect finish - a bit scary and you need a polisher but it does work well (i think he does it on his 911)

I use the eagle 1 clay mitt - only in america but wow what a product this is!!!! If you know anyone going to america get one picked up!

im trying this!

my DA6 is great (£80-100) - poorboy 2 or 2.5ssr then fk1000

might try some!

Hi all Can someone point me towards a forum trader on here for 2 spacers that fit HFCs. I've seen them on eBay for £7 but would rather help out a trader if anyone has them!

Deposit taken by Greg.

£550 price reduction. It's got to go!

Friday evening bump! with a reduction £650ono

That would be fine. I had an engine recently delivered and it cost £80 if you want to get something organised that would be fine. contact me on PM Thanks Chris Mod Edit : phone number removed - send a PM

90k miles located in Preston lancs PR4 Smoking seems to be cylinder 4 oil ring, was shut down when the issue happened therefore has not been ran dry of oil. Still ran 240bhp the drop was after 5k on the dyno then flattened. Comes with; Total engine top and bottom end Injectors Intake mani Plenum Manifolds Engine mounts Would be perfect for a rebuild or for parts Asking £750ono £550

Perfect thanks Zmanalex!!

The sensor length is different mark.

Thanks guys sorry for the late reply been fitting a kitchen. The new engine supplied to me I've found out was from an auto (I have a manual) so I can't phone Nissan as I have no reg that matches. I have no chassis number either. Will I be ok using these part numbers. Thanks in advance.

Hi all Please can someone supply me with a crank sensor part number for an automatic gearbox. I can't seem to find a number anywhere

Thanks mate. I'll check the o2 5 wire is used (I think that is correct) I thought it could be cam sensor. I'll check that tomorrow. If you think of anything else let me know. As per my last post: Crank Sensor and Flywheel And retrace your steps and check all connections. It was the crank sensor but there's an issue the new JDM engine crank sensor isn't working so they've tried to use my one of the UKDM however it appears to be different. Do you know if there's a difference and if so a part number to purchase the JDM one

Thanks mate. I'll check the o2 5 wire is used (I think that is correct) I thought it could be cam sensor. I'll check that tomorrow. If you think of anything else let me know.

What front O2 Lambda sensors did you use ? Just read some posts that the JDM front sensors are different as they don't use the post cat sensors for fuel map. Would this cause no spark though? Plus I'm using a Ukdm ECU so wouldn't it need the UK sensors?

Same as my current. It did come with the others. Should I have used those? Would that cause a no spark issue and should it bring up codes?

Yes, is that an issue? I was told it wouldn't be.

Hi All I've had the engine installed and its cranking over fine, has good oil pressure, fuel is primed and coming through the pipes BUT no spark from the coils. Done an ECU reset no fault codes are coming up (as if there was a wire not connected). Is there a difference between the keys, i've only tried one key and have the other at home but thought they were the same (no master key). The engine is a 40k'er from a JDM import and matches my year of car 2004. ECU is the same as it was in the car before, loom is the same. New ancillary, belts and clutch Areas it could be, Clutch sensor isn't registering correctly? ECU isn't being reset correct? (tried pedal dance and unpluging) Is there anything i'm missing?

oh yeah i thought the space in between my lines to show i was answering the 2 above post then the next post. Sorry, i can see how it looks now.

I didn't say clark wanted £3500 thats the ones on ebay. Clark offered me want for £1500 bare engine 60k but I've just promised on another one for £1500 with 43k