Jump to content

richard.hezlett

Members
  • Posts

    442
  • Joined

  • Last visited

Posts posted by richard.hezlett

  1. If it's the initial boot release that's not opening/lifting enough to clear the latch then this is because of the springs in your boot poppers loosing their strength. I fitted rubber tap washers to cure the problem.  The boot poppers control the initial 3-4 inch movement to clear the latch. Then the struts assist you to lift the boot lid fully open from there. 

    • Like 1
  2. 1 hour ago, essces56 said:

    350Z getting hot in traffic. Had the  local garage check and they said the fans weren't coming on. Replacement "module" an eye-watering £750 from Nissan! Is there an alternative? all advice gratefully received

    Is your local garage 100% sure it's the module and not the very common fault of the fan motor brushes being stuck/seized? 

  3. Not a hard job if you follow the video. It's a bit footery getting the fans unplugged but once you have the top coolant hose disconnected the whole panel just lifts out. I would recommend u service both fans to save any bother in the immediate future. Also bear in mind that other forum members have mentioned that the mishimoto fans are very noisy in comparison to the standard ones.

×
×
  • Create New...