Jump to content

richard.hezlett

Members
  • Posts

    442
  • Joined

  • Last visited

Posts posted by richard.hezlett

  1. Greetings from Coleraine. Plenty of Z owners here in Northern Ireland. KyleR is the man to pm if you would be interested in a meet up. We had a couple of outings last year. Initial interest was very good but unfortunately on the day numbers were slightly disappointing. I'd certainly be up for another run out if there was enough interest. In the meantime hope you enjoy your car.

  2. I serviced my 2 radiator fans a couple of months ago. Exactly as GM describes above. I removed the top radiator hose,the air filter box and a small bracket underneath it. I then removed a few of the screws holding the undertray on to disconnect the plug to the motors ( there's a push in tie wrap that needs either cut or pushed out ). The radiator fans then comes out with a bit of wiggling.

  3. I serviced my 2 radiator fans a couple of months ago. Exactly as GM describes above. I removed the top radiator hose,the air filter box and a small bracket underneath it. I then removed a few of the screws holding the undertray on to disconnect the plug to the motors ( there's a push in tie wrap that needs either cut or pushed out ). The radiator then comes out with a bit of wiggling.

    • Like 1
  4. Can't you leave the switches in situe and just swop the feeds around.

     

    Tunnel comes off easy enough, 2 screws at the back, 2 at the front and a hidden one in the coin holder from memory... I think the centre dash has to come off first though, and obviously the gear surround... handbrake just pull up as far vertical as you can, then unclip the switches at you go :thumbs:

     

     

    Sent from my iPhone using Tapatalk

    Can't you leave the switches in situe and just swop the feeds around.

     

    Tunnel comes off easy enough, 2 screws at the back, 2 at the front and a hidden one in the coin holder from memory... I think the centre dash has to come off first though, and obviously the gear surround... handbrake just pull up as far vertical as you can, then unclip the switches at you go :thumbs:

     

     

    Sent from my iPhone using Tapatalk

    +1. I removed my tunnel last month to swap round the heated seat switches. Exactly as above and yes there is a screw hidden underneath the ashtray/coin holder.
×
×
  • Create New...