Y23DRH

seems a bit cheap to me 350z roadster in white low miles aswell

http://www.ebay.co.uk/itm/Nissan-350z-Convertible-Project/272104974335?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140122125356%26meid%3Ddc58142d84714934a9fe70422ab4834f%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D151945460593

thank you every one for your help so far

sadly the lights come back on again after a few miles of driving on the way back home

reset done again and still have the same problem....

We found 3 codes

P1274

Are /fuel sensor 1 (bank one) rich condition

P1283

Air fuel sensor 1 (bank 2)

P2138

Wrong acceltor peddle position sensor rationality singnal

I have done the ecu reset and peddle learning and also throttle learning etc

Seems to be working fine now but I would imagine that there is a part that still needs replacing etc

hopefully some one can help me with my problem with my 2005 vq35de gt roadster 350z

OK couple of weeks ago both my key fobs un-synced them selves now sorted and working again new keys had to be ordered and programed to the car

few days latter the car battery went flat so new battery from Nissan was ordered and fitted thats that problem solved

not sure if the new problem would be anything to do with new battery been fitted but thought i would mention just in case

yesterday whilst driving home the eml-slip light or traction control light and abs lights come on

car wont go over 16mph in any gear and wont rev past 1000rpm in any gear

if i kill the ignition and start the car problem goes away but then quickly comes back about 15 to 20 seconds later

any ideas what could be causing this problem

any help would be very much appreciated

Hi where are you located if your not to far away I would he interested in this

Just got word that pure rally is cancelled for this weekends one hope no one payed for this one the event has even dissaperd form the Web site :/

7hrs of my life used up working on the zed

Eyelids

Door mirrors

Side and top pillars

Top of bumper under headlight

Door handles

All wrapped in satin black

It's never ending 😂 More updates shortly

lots of work on the engine bay how it looks so far

Custom interior black leather purple stitched 

Including seat belt covers 

Sun visors 

Gear gaitor

Handbrake gaitor 

Custom steering wheel

Black mats and purple out line 

Custom painted centre console 

Custom painted door handles 

Led white interior bulbs 

Nismo head/neck supports 

Complete carbon interior bits fitted and z badge 

Custom made and painted sat nav cubby in purple with Tom Tom XL fitted in place

Been a while since I've updated

Purple wheel lips added

Purple metal valves added

Front vent cut out with purple outline

Eyelids added

Cannards added

Nismo style splotter added

Arches rolled and coilovers lowerd more

Resprayed the custom exhaust system black

Smoked indicators and rear lower lights also smoked

updates so far

7hrs of my life used up working on the zed

Eyelids

Door mirrors

Side and top pillars

Top of bumper

Door handles

All wrapped in satin black

More updates

Purple wheel lips added

Purple metal valves added

Front vent cut out with purple outline

Eyelids added

Cannards added

Nismo style let added

Arches rolled and coilovers lowerd more

Resprayed the custom exhaust system black

Smoked indicators and rear lower lights also smoked

Bonnet removed to work on the engine easier

How the engine bay looks so far

more updates next week

Quite a few updates

Custom interior black leather purple stitched

Including seat belt covers

Sun visors

Gear gaitor

Handbrake gaitor

Custom steering wheel

Black mats and purple out line

Custom painted centre console

Custom painted door handles

Led white interior bulbs

Nismo head/neck supports

Complete carbon interior bits fitted and z badge

Custom made and painted sat nav cubby in purple with Tom Tom XL fitted in place

Pm sent thanks

I seem to have misplaced my single carbon front air duct :|

So if any one has one for sale carbon or black one

please get in touch with me thank you

Ahh all work done car now runs sweet and also idle is correct at 450 to 500 rpm

Replaced the throttle position sensor

And did all the Reset procedures funny got them right haha

Even had time to install the new cup holder and done the interior lights and exterior bulbs and new brake pads all fitted and yep I'm happy cars back to being safe

Thank you all for your input and quick replies

Hi thanks for your replies once the car had stopped I turned off ignition and re started the car was all working fine again

I have discounted the battery be cleaned the throttle body and checked it no problems moves freely etc just doing the resets there a bit tricky to do haha

But I'm sure I will get there

Will let you no how I get on

throttle stuck wide open on way back from acecafe down the a40 is not fun at all soon as you lift off the accelerator pedal the car would just accerlate very rapidly

So my question is what could of caused the problem????

It's a 2005 350z de roadster any help would be very much appreciated

Thanks dan

Anyone going tonight will pop in say hi

Door handles still available just need drivers side??

Should have all the parts in stock that you require.

 

Just drop me a PM with confirmation of which parts you require.

 

Alex.

Pm sent

Need one of these for a 2005 350z roadster

Drivers Door was stuck closed managed to get the door card off and used the good old coat hanger trick to open the door

I found that The small metal rod with the blue clip goes down but won't come back up to let you open the car door with the out side handle unless you manually pull the metal rod each time to open the door

not sure if it's the out side door handle that's the problem or the door catch / mechanism etc the central locking works fine and both the passenger door and boot open fine just drivers door that's being a sod

I have attached a few pics

So people can see what im looking for

[/url]

Hopefully these pictures have helped

Sorry for the late replies

It was the brembo calipers catching at the top

I Tried 45mm spacers and still catch so i sold them on

Thanks for the quick replies every one

what size spacers would I need to Clear the brembo calipers

17 inch ssr sp1 professors 3 piece split rims

17x7.5 + 35 front what size spacers would I need to clear the calipers and the bolt on no problem but wheel can't rotate more then half a turn ???

17x8.5 +43 rear fit no problems

Any help will be very appreciated