Y23DRH

Will this work with the pre facelift 2005 roadster gt with bose audio if so what other bits if any would i need to get this to work ?

What offset are the fronts? Or are they et15 all round? Definitely won't need the spacers.

Yea there et15 all round

Will look good. The trouble with that design, is that the wheels look smaller than they actually are, but thats not always a bad thing. What colour car they going on?

They would be going on this just not 100% sure as the rays are quite nice

Might look for something simular to the rays bit look a bit more agressive

What do you think of these

18inch rota journeys 18x9.5j and 18x10j et 15 to go on my 350z roadster

To replace the rays alloys

Will be fitted with 25mm front spacers and 30mm rear spacers if needed

What do you all think ??

Not sure if i like them or not yet but my mod today was to fit my number plate surrounds :/

Spotted a nice 350z silver or was it grey coupe :/ with private plate on it almost spells nissan

Looked really nice

Shame the weather was shocking would have got some photos

Any how i parked opersite your car in my grey roadster well i was sort of stalking you :/ so i could say hi but you never showed

Nice car tho

Any ones on here ???

I have 25mm front

And 30mm rears lowered 40mm

Deffo one the best mods i have done

Congrats on the purchase

i love my zed roadster aswell and your local to me even better .

Hopefully see you on the a4 bath road im on there alot

Enjoy the car

What sort of power increse will you get from these ?

I have these on my car all round very high quality

My cars 40mm lowered all round with 25mm fronts and 30mm rears on 225 and 245 tires no rubbing at all hope this helps with the sale

Dibs black cooling plate

And chrome bolts

Been told could be clutch or flyhweel problem :/

Have you checked out the gearbox mounts? They could be shot.

Gear box mounts seem to be ok

Fluid all toped up at last service just over 3 weeks ago

Had a look at the supports they seem to be very tight only found one lose one had a long bolt and bit or rubber attached to it tightend back up but nosie still there :/

Will see if i can get the car in the garage this week and have it checked over sounds dreadfull goes away once the cars warm then back again when cold ?

350z roadster i have a seriously bad vibration from the gearbox area whole car vibrates but only when you let off the throttle it's dam annoying and very loud any one heard of this before looked to see if its the exhaust but don't touch the body any where the vibration is comeing from the gearbox area any ideas would be very greatfull

Still looking for some 4" exhaust bungs any one got any for sale ???

Loads of people run a 30mm drop with wider tyres bud.

 

It might look better but won't handle too great and you will prob get TCS issues.

Ah ok cool

What width would you suggest on 35 profile all round ??

Time to replace my tires on my rays alloys 350z

 

I have the correct fitment

 

225-45-18

 

245-45-18

 

Cars been lowered 30mm all round and spaced out 25mm front and 30mm rear

 

Was thinking of using

 

225-35-18

 

245-35-18

 

Would these be ok heard of a few traction control and abs problems etc but 45 profile seems a bit balloon tire for me ?

 

Any help be much appreciated

 

That makes the rolling radius around 6% out which is a fair amount! If you are wanting to decrease the rolling radius you really need to increase the width buddy.

Hmm yea problem is my cars lowerd and sit perfect to the arch i cant go any wider as will touch the arch and i do t want to higher it back up im hopeing the 35 profile be ok im not looking to track the car etc just looks better then 45 profile i think and then can lower the car a bit more ??

Time to replace my tires on my rays alloys 350z

I have the correct fitment

225-45-18

245-45-18

Cars been lowered 30mm all round and spaced out 25mm front and 30mm rear

Was thinking of using

225-35-18

245-35-18

Would these be ok heard of a few traction control and abs problems etc but 45 profile seems a bit balloon tire for me ?

Any help be much appreciated

I've lost 3 bungs around town! If it's a 3" bung I have a spare you can have for free if you pick it up.

 

If not, theres a company on ebay who sell them for £15 each and they work pretty well.

Im pretty sure the there 4 inch bungs will measure one and see

Sure a Bolt didnt come loose and shot out going down the road

Yea im sure as they have 2 bolts holing them in and they were tight as re fitted them Night before :/

Sorry that someone is thieving around your way, however, a missing bung, perfect excuse to buy a completely new full system that doesnt need bungs and wont fall apart

Ha ha i have the only japspeed bit on my car are the back boxes it had a full custom power flow one done yesterday

New y pipe decats and centre section also had resonator removed and manifold was done couple months ago but i like the back boxes as i sprayed them black suit the look of the car just need the bungs for around town as its mega loud with out them

Some sod has stolen one just one of my exhaust bungs :/ so now i need a replacement if you have any for sale let me no as my cars stupidly loud with out as has decats and no resonator aswell so i value my hearing

Needed asap

Many thanks dan

So who is going tonight?

Yep i will be there as always see you there

btw the japspeed back box isnt fitted in the picture

Dont fit it seriously don't

i had there system falls apart and centre resonator starts rattling drives you nuts get a custom one made up if you dont mind spending £500 ish on one

Sorry to hear you selling it buddy was comeing along really nicely

If you plan to sell the private plate let me no mite be intrersted