Vlad

There's quite a bit of adjustment so me personally would go for 2030 belt

Oh ok... Then for 3.12" pulley you will need 80.070" belt...closest one is 6PK2030 You can get it from same eBay link I've posted above! But I would suggest to go to your local parts store and get 2-3 belts... Like 2030, 2020, 2013 etc...then see which one fits better and return others (usually you have 28 days to return) - that makes it easier than posting item back to eBay seller for a refund. Or just wait for confirmation from Chris, ones he gets it from vortech...or just wait and see what belt you will get when SC comes and then go to the shop

From what I've read the standard belt is a 93.5" 6 rib ~ so for the 3.12" pulley you would need a 93" 6 rib belt. Gates make them from what I've just read on my350z.com. Ok so doing more research this may be the wrong lengths. Reason being Vortech have changed the belt arrangement (less pulleys or something) so the belts now will be shorter from what I'm lead to believe. Might just have to wait and see what belt comes with the Vortech and take 0.5" off it when looking for a belt. The belt part number Tarmac listed converts to a Gates belt number K060795 from what I can ascertain. Which is apparently an 80.070" belt.!? Getting confused now. Well, yes, either wait and see what you will receive or as you said it's got part number and it says 80.070" - just get 0.5" shorter...but you need to transfer it from inches to mm... So 80.070" = 2034mm Then minus 0.5" So 79.5" = 2020mm So, you will need 6PK2020 belt http://www.ebay.co.uk/itm/310826609954 Simples Belts need to be pretty tight to stop spinning and loosing boost... So you can get one smaller belt(to be on safer side), I think next one down is 6PK2013 (2013mm in length)... You can always just return it and get refund if you don't need it

You can get them off eBay. I usually get it from local car parts place (GSF or Leamoco) They just normal 6 rib belts...so not hard to get it

Can you get hold of the correct Gates belt for this pulley set up then Chris? Would prefer to get it all from you of course if possible. Up to you, but you just will get exactly same belt but for £60 instead of £20ish lol We already configured out sizes for it anyway

main belt (Gates) over here is usually 20-25 quid

Yea, got your pm mate, thanks Will stick to original dial card for now as a bit skint after purchasing new SC unit + holiday lol Thanks

Battery fuse is located on actuall positive terminal of the battery...take that terminal off - and you will see what I'm on about Mine gone last year...I think it was around £70 for a new one from Nissan

Check the main fuse that goes off on positive terminal on your battery...they usually go if you got wires wrong way around!

I'm sure it will be cheaper than buying it separately, later on, yourself and paying more for delivery/import tax etc ! Wil wait and see what Chris says

Chris contacting people@Vortech today for prices.

Actually no, my belts will be different as I'm running GM pulley mod as well lol

That's correct...I got belt for 3.12 pulley at home, but I'm away till next Sunday, so can't confirm length

Belt wise, as far as I remember - each step smaller pulley shortens belt by 0.5"... So if you going from 3.33" standard pulley to 3.12", you'll need 0.5" shorter belt... That's as far as I remember! Please double check

I'm an ATM engineer...it could've been retained for different reasons... Card issues (expired, damaged/slightly bent) ATM has a fault (faulty card reader or anti skimming device) which will cause it to keep card/freeze ATM or fraud device on ATM. Most ATMs fitted with anti skimming devices so its harder/impossible to skim your card...unless they physically obtain it. Just bad luck! Cancel it and ask for a new one:(

Anybody wants different pulleys or anything? Like 3.12" drive pulley? If so, put your names down so Chris can see of its worth as didn't it to this order 1. Vlad - 3.12" pulley x 1 2. 3. 4.

haha only joking!

yea, for breakfast with corn flakes

Was very drunk! Paying for it today lol

Edit: double post

Looking great mate! Any chance of a pic with lights on? So I can see how it looks with blue LEDs and standard dial card Thanks

Thanks guys! Jared, any chance you can send me a pic of what your back light looks like with standard dial card in please?

So is it A) rub it off Or B ) get new card Or C) get new card and run it off? As original not rubbing off?

*thanks spotted 1st mistake myself

Hi people, Excuse my English, as I'm away on holiday and a bit drunk One one of my mates really good at soldering etc, so I brought my dash here for him to change back lighting from orange to blue... But he just messaged me with a slight problem... Speedo/petrol level etc plastic is orange it self..so if he will change light to blue, it will be mix of blue+orange... My question is - can orange paint be rubbed off that plastic, so it's just see thru? Or how people gone around this problem? I also have spare JDM clocks...is actual motherboard different? If I tell him to carry on and put new, blue, light diods on and I don't like it, can I just swap main motherboard of JDM clocks on my clocks? Thank