-
Posts
3,424 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Vlad
-
-
I removed my from passenger side as well. They both connected to each other anyway.
-
Fitted on my ok. I've used slim hub and slim quick release
-
NRG. They do both - hub and quick release and fits perfectly.
Also I would chose "slim" design for both, otherwise steering wheel will be too far towards you...unless that's what you want
-
Put it on inside of the windscreen - that way wipers won't ever touch it
That will not work as the inside of the screen is still covered by the regs:
Additional Opaque Films
Additional opaque films are subject to reason for rejection 1 whether fitted on the inside or outside of the windscreen.
However if it is tinted film rather than opaque:
Additional mirrors and tinting films are not subject to Reason for Rejection 1.
LIMO Black anyone
Yea, sorry, that's what I meant. A sun strip from tint film. Couple of my mates have that on their cars for past 3-5 years and no problems at all
-
Put it on inside of the windscreen - that way wipers won't ever touch it
- 4
-
I'd just replace it , (if you've got power there use it.) but with an LED equivalent. Some thing like this if it's a flood light. What kind of light is it.
Yea, perfect. Will go for that one
-
Get a 30W mate, 50W will be too bright by quite a lot haha
Ok, I'll go for that one then thanks for your help
-
Just make sure you can run a good distance within 20 seconds
Run? What kind of animal is that?
-
haha nah, he can just stand outside and guard
Probably best, ...now don't forget to pick up some 7.62mm rounds next time you're in Russia for his quad machine guns.
I'm pretty sure these things never come with ammo.
Haha buy another suitcase then
-
haha nah, he can just stand outside and guard
- 1
-
ED209
What's that? Searched for it on eBay and comes up with robots and all that
Not sure if serious or trolling,... ...but just in case you're serious Vlad this is ED209 below (from original "Robocop" film).
ok, ill order one of them then
- 1
-
I'm only staying at this place for few more months, so not bothered, as long as it lasts few months haha
Area to cover is drive/front of the house. i would say about 6meters by 8-9 meters and light will be on the house wall, about 4 meters off the ground if that gives you an idea?
-
I work at a electrical contractors & I specialise in lighting sound like your fitting glass was really cold & when the halogen lamp came in it got hot fast which caused it to break or when u put your lamp in u used your bare fingers instead of using the foam which comes with it, finger prints on them lamps ruin the life on them & cause them to pop, also u don't want anything solar powered now a days reason been they are all rubbish pretty much & at the price it's up it won't last long at all! Just replace it with an decent LED fittings & try get a COB led or SMD they are the brightest 2 then just depending on what kelvin u want
or that
Halogen bulb still intact and works fine... so it was either strong wing/broken frame or getting hot from cold too fast caused it
is this ok?
-
Thanks all.
Instead adding another light, I will just replace broken one with a new, LED, one powered by mains as can use existing wires then
-
ED209
What's that? Searched for it on eBay and comes up with robots and all that
- 1
-
If the glass was tempered and got hot and then got hit by rain they can shatter. Seen that a couple of times.
Yea I thought about that as well...but I'm going with Alex's scenario lol
-
You have mains in place so would stick with that.
As regards the glass breakage, I had a similar issue when the glass retaining screw worked its way lose and the strong winds did the rest.
Thanks Alex. By the looks of it that exactly what happened... Just went up and looked at it - and side bolts are fine, but actual bracket corroded and snapped away and light was lose and this "break" happened last week, when we had strong winds. So I'm pretty sure it was that. Might as well replace that light with a new, LEd, one anyway and use existing wires
-
Little pre-story...
Mrs goes to me another day "why are there pieces of glass on the drive?". I have no idea. Didn't think anything of it, until next day when I thought that all house/car windows are intact and only other thing with glass in it is security light. Went outside - and yes, glass on it is broken. Thought may be bulb exploded and broke it (doubt it, but never know) - turned it on, bulb still works. Light is just above patio, at the front. About 3 meters in the air...bulb works, so somebody tried smashing it? Why? Street is quiet and full of old people, so doubt anyone from here smashed it.
May be thieves? Smashed it one night and planning coming back to nick something in near future? Never know.
So thought I'll get another light and outside IP camera, just to keep an eye on things.
Question is:
Came across this on eBay and other websites:
http://www.ebay.co.uk/ulk/itm/161831389845
Solar powered LED light. Does anyone have any experience with them? Any good or complete waste of money? Reason I would prefer one of them - so save hassle with all wires. Since all bulbs are LED I guess it doesn't drain much power? So may be that solar panel will be sufficient? Or am I better off with usual hard wired light? If so, can I chain-link/wore it to the original light?
Thanks
-
Damn it! I need a sun visor as well lol
-
There are like at least 5 of them on FB lol
-
Which side do you need? As there are 2. I have passenger side if needed
-
Mine came apart quite easily with a bit of wiggling, but yet sits solid when in place
-
I did read it, thanks. That's why I specified it happened on Windows OS, but principle is same I would imagine!
Not really, totally different.
Sorry Mr iKnoweverything
-
Oh damn it! As I have one for Z, but like the look of that carbon one and was hoping I can get one as well lol but can't be arsed with trimming it and trying to make it fit lol
Dremel makes light work of it, just takes so long knowing what to take off.
See what the finished article looks like but couldn't get the angle of the gauges to my satisfaction.
No sure what i'll fix it to the pillar with yet
One I bought from Tarmac, came with little hole in it, to use a screw to screw it to the A-pillar, but I didn't fancy having a screw, so used one of them glues from Halfords, that comes in 2 tubes and you mix them together and it's solid.
- 1
Anybody knows this S14a or in general S14a?
in Off Topic Discussion
Posted
Planning to buy my own place quite soon and i always said that I won't sell Zed... but in 2 minds now and only way i would sell Zed if i get another decent toy to replace it.
And came across this, which would be ideal...love S chassis cars, this one looks clean and after chatting to the owner over FB - looks like its very clean for its age and solid underneath etc. So would be perfect scenario: Sell zed, buy this and have few grand spare to go towards house.
Anybody knows this car? Or any general info about S14a? Or may be someone registered on their forum and can post for me asking about the car? As i have zero knowledge about them.
Description
Hi I'm selling my Nissan 200sx, this car is in very good condition, has not been used as a drift car, has some service history, mot till May but I can put a fresh mot on, just had a full service engine oil and filter, diff and gearbox oil change, new pas belt, new spark plugs, anti freeze changed
Engine has no vvt rattle, power 405bhp with print out
Uk car, mileage 108k
Engine spec:
740 injectors
Z32 maf
Nistune ecu
Tomie pon cam's
Tomie rocker stoppers
Blitz air filter
Turbo smart boost control
Full exhaust system
Braided oil & water pipes
Sard fuel pressure reg
Cast top mount exhaust manifold
Tail 38mm wastgate
Front mount intercooler
Copper radiator
Turbonetics turbo 3071 size
Uprated fuel pump
Transmission:
Competition clutch stage 4, 6 puk paddle
Brakes:
Front - brembo 4 pots with bigger disc's
Rear - r33 brake set up
Braided brake pipes
Abs delete kit
Other bits
Tein coilovers
Full Bdc spec rollcage
Jdm bucket seat
Jdm gear knob
Apexi boost gauge
Rota gtr-d wheels 18"
D1 rear bumper
D1 side skirts
Clear front indicators
S15 passages seat
3 point harness's
Battery relocated in boot
There is probably stuff I've missed, good condition underneath for any more info please inbox me
Not bothered about cosmetics (wheels, seats, cage etc), just don't want to get rid off perfectly running, with no faults, Zed and get something that will break as soon as i get home (suppose, that can happen to anyone with any car).
Any help/advise on these cars will be appreciated.