rabster

Hiya that would be great if you can get some pictures up and a price that would be great

Ok so been giving this some thought and have a few bits that im looking to get done before show season kicks off next year..... Bonnet Dampers Carbon Fibre Air diffuser (front of rad) seen a few variations of descriptions lol Carbon Fibre Engine Cover Spare Plenum for polishing Carbon fibre covers Battery and Fluids Going to make a Grounding kit Silicone Tubing and hoses what else tidy's up the look of the engine bay Supercharger.............. edit also where is best place to get them from i see alot of the carbon fibre parts can be found on fleabay direct from hong kong anyone had any decent versions from there.......

I will try and get to the car in the morning and get some more info for you but the only wires i had to find my self were :- - reverse Trigger (taken from passenger rear light must be somewhere closer...) - Mirror Up (Passenger door well at SMJ) - Mirror down (Passenger door well at SMJ) the Ignition, ground, constant 12v i already have a provisions for as i made my own for my items i install this way i know everything i install will be independent of the cars factory wiring.... as above it looks like i used Blue with red stripe Green with Silver dots of course i will double check this....

you are correct i have done group buys before on Outlawjapclub.co.uk i buy it bits from the states once every few months i don't mind stumping up the cash in advance for these if i know there is a genuine interest i don't know how the group buy works on here if someone wants to contact me regarding it we can sort something out.....

From zooming in on my photo's easier as im not with the car it looks like i used Blue with red stripe Green with Silver dots you can Ground to the chassis to which there is enough bolts in that area the 12v and IGnition are the only real trouble but again not a seriously big problem

Glad you liked the gadgets there are just a few lol ride should be good combination of full TTE racing suspension components along with 19" wheels lol oh how could i forget that small turbo too as for my zed im going to fit a TPMS system in the new year i think as apparently i have inner tyre wear on the front so good excuse while the wheels are off to get them fitted

what did you think of it how many of the gadgets did he show you... i know i cant belive he is thinking of selling already i have been considering my funds but dont think i should buy a 4th car lol.....

ok so fitted my retractable plate today

oh i have a few of those as well lol this one looks more like its been pushed in and popped back out as its more or less a circle albeit a wonky one lol

Ok so was looking at the front of my car today and designing the bracket to mount my number plate and noticed a a hairline fracture in my paintwork it looks like it might have been pushed in as i can trace the crack right around an area, its not very noticeable but its there So does anyone know the best place to take my car to get the front bumper repainted in essex ? i used to take my lexus back to the stealership every-time i wanted the paint doing is this one of the best options i know they will be more expensive but is it worth it ? what's your views......

i dont have a wiring schedule for this unit i do things as a test on my car then use other peoples cars to put a install guide together, did this a few times on Outlawjapclub.co.uk if there is someone in the essex area that wants a kit fitted i can arrange this and we can work together to make a wiring guide ?

ok so i found this link on the forum which shows the towing eye on the crash bar viewtopic.php?f=35&t=19516&start=0 It looks and im sure someone can confirm that its just a tapped hole on a bracket welded to the crash bar, this is good news as i can run a bit of stud through the tow eye and nut it both side which will give me the basis for some extra bracket work

That's great looks like mine is a 22mm Next question is the mounting point just a thread tapped into the steel or is it a hole with the thread tapped into it again as in a straight through hole if I had the car I could look this up it's real pain not having the car lol

i would but the car is about 100 miles away so was hoping to get the details if there are 2 sizes if i have both sizes of rod at work ill take both home lol

Hey everyone Does anyone know what size the Towing eye thread is for example M10 M12 M14 etc Cheers Andrew

sorry to resurrect an old thread any one got the guide on fitting the retractable plates as the 1st few post are missing the info now

yep those are the units

yeah i am same user id as on here

funnily enough im planning on selling the White one ASAP if anyone knows someone who is after a winter car its an NA version. once sold its a tough choice between Supercharger for the 350z or Masa Bodykit for the stag....... I have 2 remote folding numberplate kits one for each of the remaining cars just got to decide when im going to fit it lol yeah its an auto and the kickdown is fun......

Opinions on the car are divided by most, but it is a Skyline underneath and a real wolf in sheep's clothing and a head turner as no one knows what it is The general impression of people on the street is what the fck is it once they start to look into it they seem impressed, its not the same impressed as you get with the 350z but end of the day this is a car for everyday use and winter mainly

i havent yet fitted the autofold mirrors but they should work as it the mirror folding uses 2 different lines than the mirror dip kit, i know there is a auto-fold kit that everyone on here has already i have a kit which i have used on all my other cards which im hoping to fit to the zed now the winter is here i may well get round to it lol

Cheers mate Pm recieved i shall have a look over and get an order in to you

Very easy as it goes i was quite surprised like i said 90% of the wires you need are in the Passenger footwell with the eception of Reverse Feed im assuming there will be a 12v and Ignition feed in that area but i never looked as i had my own sources due to the CAR PC YOu can wire a switch in on the Ignition line which would tell the unit not to work same as you can put it on the reverse trigger feed. that being said the unit has 2 modes 1 where it works every time u put it into reverse the other you have to double punch the reverse so that it operates i have done it on my car makes it easier to park sometimes when you dont want it to dip down etc.

So i got annoyed in my past cars where i did Kurb the wheels and i thought to my self not going to do it no more so looked into a way to make the wing mirror drop down when in reverse and then return to where it was. so far i ahve fitted them to the following Is200 Is300 Mr2 Micra 350z Meriva 90% of the cables you require are located in the passengers foot well of the 350z. i gave up with the manual and went back to basics with the DMM and voila, the only cable i didnt look for was a constant 12v as i had already brought my own cable through the bulkhead from the battery for my car Pc this same cable also provides a Ignition feed as it does my car pc Setup as well...

think i have a good collection now