Jump to content

simon da silva

Members
  • Posts

    701
  • Joined

  • Last visited

Everything posted by simon da silva

  1. @*!# i have 2 one looks like yours but what the heck is the other for?
  2. Alex doesent have any please somebody, its 2 screws and then you can remove the airbag unit and take some pictures.
  3. what wheels are they? they are just what i have been looking for!
  4. Hey Guys. the former owner of my 350z did me a very nice gesture and broke the 2 connectors behind the air bag in the steering wheel. I was able to get 2 new connectors but they cables on the don't have the same colours as the cables in the car. Therefore, is there a kind person who could take me a picture of the cables and the connectors so i know how to solder it together so it will work. I have 2 connectors. for 1st connector there is 2 cables, one is red, one is brown. for 2nd connector there is also 2 cables, one is green, one is brown. I believe brown is Ground, but Im not sure what is what. PLEASE help me out Thank you!
  5. 1. andlid 2. jamzee500 3. octet 4. evest 5.keyser 6. Jim Clark 7. DBlock 8. Simon da Silva Do they come with new belts? since mine is worn!
  6. im up for a set.. do they also come with a new belt? mine is a bit worn and would need replacing soon.
  7. Ok, i'll check the cabels in the engine bay tomorrow. thank you guys
  8. The trottle bodie sitting in the engine? since the error code is telling me its the senor in the pedal that is defective.. i belive you are right about the bad connection cause my ODB Reader said something about low voltage.. but voltage seems to be fine.. idle is 13v and driving is 13,4-5 ?? should be fine for charging the current batteri installed
  9. Accelerator Pedal Release Position Learning Operation Procedure 1. Make sure that the accelerator pedal is fully released. 2. Turn ignition switch “ON†and wait at least 2 seconds. 3. Turn ignition switch “OFF†wait at least 10 seconds. 4. Turn ignition switch “ON†and wait at least 2 seconds. 5. Turn ignition switch “OFF†wait at least 10 seconds. ????
  10. Hey Guys. My car keeps on going into Limb mode.. it works fine for 100 miles after i clear the ECU, and then it turns back on. Errorcodes are. P2122 Accelerator Pedal position Sensor P2138 Accelerator Pedal position Sensor Is this a common fault and how can i fix this? this morning i wasen't able to clear the code.. so i had to drive 20miles back home in limb mode ( BORRING ). Is it a new pedal or???
  11. Rays Engeneering Grams light 57s-pro make em cheap!
  12. Yea i just noticed your add but allready sold to bad since it was the right price tag for me. you got any contact info on this Adam?
  13. Hey Guys. Anybody knows where to buy Ro_JA Wheels? im in love in the R2-7.. Anybody?
  14. PM Both lets hope for some quick response! i need this BAD so i can get my 350z to pass MOT
  15. Hey Guys. i tried to get my car past danish MOT today but it failed because of the airbag light not working.. hmm wierd i thought.. there must be some more paper in the speedo, so i opened it and yea more paper. Only issue is that the idiot before me who had the car broke the 2 plugs that is supposed to go into the airbag in the steering wheel. So i need a new clock sping, or replacement clips for the cabels.. Anybody that can help me? here is a pictures of the 2 cabels and the plugs that im missing.
  16. mine is a US import.. will i have fitting issues?
  17. Trying to push the price for the Work wheels but they are darn expensive
  18. my problem is, i can't decide the one i like the most i think im scalling towards the Work but its alot of $$$
  19. Hey Boys n Girls. I have narrowed down my search to these 3 awesome wheels, but i cant figure out what to go with.. Please help me Here is the car as it is now. Complete photoalbum here http://www.bilgalleri.dk/html/gal_visbi ... ipc=643491 First wheel is from Varrstoen and is the well known ES2.2.2 but i think i want it in full polish Secound wheel is the Axis Shine deep dish Last wheel is the WORK T1S Luxury Sport 2 Piece Wheel, its the most expensive wheel and sadly 10-12 weeks delivery but they are custom made. Let me know your comments!!
  20. http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :MESELX:IT do you ship these to denmark?
  21. Try the F10BT or F20BT once and you are sold But yea the features in the F900BT is AWESOME!
×
×
  • Create New...