350zblack

i recently bought an ebay special stubby ariel for my zed, its fits and looks fine but the reception is poor compared to the standard fishing line. only after i purchased it did i notice the posts about the o.e.m s2000 stubby, ive now had a look for one of these s2000 versions but with no luck, anyone point me in the right direction? thanks

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :MESELX:IT

thread can be closed/deleted, just sent payment alex thanks

price posted for the red hose? thanks

I was supplied with 3M tape and the screws as well. The tape is handy for holding it in place while you drill the pilot holes for the screws. I bought it here: http://cgi.ebay.co.uk/NISSAN-FAIRLADY-3 ... 3cb17217bc Cheap as chips! I would say that it doesn't sit quite as flush to the bumper as some of the premium brands, but personally I'm satisfied with the results. Also - be aware that I had to make up my own template, but with a bit of time and care this isn't too difficult. I'm emailing the seller to see if I can get one for the other side. brilliant, thanks

thanks

looks good, how does it fix is it with silicone or are those 4 screws around the outside? also could you give the link to ebay shop where you got it from thanks

i currently have the LED strip lights where the standard front reflectors go in the bumper, it is a nismo front bumper and my question is will the standard reflectors fit on my nismo bumper or are they different fitments? thanks

you still after some? noticed this is over a week old but thought id ask as i have a set + good tyres thanks

thank you for the useful input. alex, i will send you my vin tonight thanks

thanks, will keep looking round to see if there are any second hand ones for sale if not then ill PM you with my vin

hi im need of an inner arch liner for the drivers side, im only after the front part of it (i.e front bumper side) not the rear part as i still have that thanks

19", 8.5 wide front 9.5 wide rears, and as said they are et35 ill probably see how/if they fit without spacers. then if needed to fit or for looks go for something minimal like the eibach 5-10mm ones? thanks

i have a uk spec 350z with the brembos, ive seen some alloys that have an offest of 35f and 35r, now i understand the standard 17" alloys have an offset of 30f 33r and they clear the brembos fine? what is the correct offset needed on the alloys to clear the brembos without the need for spacers? thanks

also, would the 8.5 width front alloy take a 225 front tyre as apposed to the 235 tyre? thanks

upgrading to 19s yes, and i meant to put 35 profile for the fronts not 30 would this be a good setup? thanks

just bought my first 350z, need some new tyres so going to upgrade to 19"'s front are 8.5" and rear are 9.5" now what would be the best size tyres for the fronts + rears? would i be alright with 235/30 fronts and 265/30 rears? thanks in advance