km002916

Does fitting 20mm spacers on rear mean you have to cut stud in hub down a bit and if so would 15mm slip ons be a safe bet or is there too little thread left to put nuts on securely?

Having just got my new 20s I'm looking for 10mm slip on spacers for the front and 20 or even 15mm bolt on hubcentric spacers for the rear. Has anyone got some used ones they'd be interested in selling me, the budget is very stretched after buying the wheels

thanks Sarah

totally agree with you tyre wise, will go for 295/30s when they need replaced rather than 285/20s that are on them just now

did trial fitting tonight, didnt look 2 bad without spacers. Think 10mm front and either 15 or 20mm rears would be perfect, opinions?

Thanks so much Sarah, deffo 73.1mm that I'm looking for. If you dont please let me know and I'll give Andy a PM as Chris suggested

can you sell spiggot rings, I need them for my 350Z for my new Vossen 83s, I believe 73.1 down to 66.1?

Does anyone on here sell spiggot rings, I need them for my 350Z for my new Vossen 83s, I believe 73.1 down to 66.1

Thanks alot for that

im checkin theyr same as s14 which seems to be 66

Do 350Z have a centre bore of 66?

is the centre bore of the 350Z 66?

Not yet, just doing a bit of ground work just now so I know where and what to look for.

Was off a Lexus OC forum (I used to have a soarer TT) but purchased and paid for through ebay so if there was any probs I had come back.

cheers andlid The 25mm H&R ones seem to be very commonly used for 200sx s14s through SXOC and driftworks. I've sent a few PMs about them and one for 20mm Keis which are sold by someone recommended on this forum. Can anyone confirm 100% if 200sx S14/As the same centre bore?

Thanks

any particular reason?

200sx s14/a are the same pcd and centre bore aren't they? Found 10mm ones for 50 euro too (would these be enough for the front?)

Would H&R hubcentric 25mm spacers do the job, found 2 for £60

They're used, unfortunetally my finances won't stretch to brand new What sorta size of spacers, 20 all round?

I dont ave brembos, I'll see how they look on the car

Just bought a set of 20s for the 350 but was wondering if I need to get any spacers or anything or if they'll fit with no problems as stated by the seller? The front wheels are 20x9 inch with an offset of +35 and tyre is 245/30 R20, the rear wheels are 20x10.5 inch with an offset of +45 and tyre is 285/25 R20. P.S. I'll reveal what ones and get pics up as soon as I recieve delivery and get them fitted

Im desperate to start modifying my 350 but finances just wont allow it , I was wondering if anyone had anything like a S/S backbox, popcharger, set of 19s (swap including my std 18s), led rear lights, etc, etc that they'd be interested in swapping for my Apexi SAFC II? I also have a set of unused 6k hid bulbs from a hid conversion kit if anyones interested? I'm based in Glasgow.

any problems with sale let me know

Im biding my time until he drops his guard then