ollyd

After pair of factory blue front wings. Would consider pair in other colours if in good condition and reasonable price.

Your going to need a lot of t cut

Cheers, just managed to source pads and ECU just after panels now. Car has been off road for while for TT conversion so hoping to find panels in right colour before it goes back on road. Might have to be a respray job

Im after a set of front wings and any style of bonnet in the factory blue. Had an unfortunate incident in which bonnet was left open on a windy day. All three panels are a write off : ( . Am also after late spec door cards and knee pads to complete interior upgrade as well as late A/C ECU. I am Poole area but can travel for the right parts at the right price.

I have this problem have fitted entire 2006 spec but can't find knee pads and originals won't fit. If anyone has 2006+ knee pads would be interested. Have all original pre 2006 console/dials/heater controls if anyone wants to buy.

Have done this to mine also need complete centre console including knee pad trims and dial surround as all parts are different and not interchangble

Got one in my garage as fitted vented ones from a convertible. Let me know if you still need one.

Agreed 350z is a nice car but my old M3 evo was faster and handled better and only 4k

Hi Im from round swindon way too, did you get the bumper done? I had my whole car sprayed by JP Body repairs in swindon last year after they did a nice job on an m3 evo I had few years ago. End result was dissapointing with slight orange peel all over and front bumper paint now cracked. Went back to get fixed but he wants to charge full amount as he says the primer already on the car was not correct (would have thought he should have fixed this before spraying). Long story short now looking at getting bumper re-done and don't really want to pay them to do it. Def would not recommend them as you just dont know how their work will turn out they even charged me for materials when I asked them to do the roof again as finish was unacceptable first time. Would appreciate it if you could let me know how you got on so can get mine done. Also I work in Plymouth if you still have any contacts in devon/cornwall that might be better. Believe BMW swindon use Dick Lovatt spraymaster VERY expensive.

About to fit kinetix cats to standard system will let you know

Let your rear tyres right down to nearly on the rims then let the traction control take over and you won't get stuck anywhere, just remember to re-inflate before dong anything over 30mph

Yes they just plugged in thanks for advice.

Exellent hopefully get them tomorrow will update.

Ordered bi-xenons now anyone know what mods I will need to make? They come with all bulbs and ballast. Thanks in advance.

Just fixed my bose unit after a jam. Very easy took about 30 mins. Basically unit double feeds discs causing jam. There are about 6 grub screws along top cover of player. Remove these and pull top off. You can now see into player and see jammed discs. Plug harness in and press eject. Gently manipulate discs as unit is not strong enough to pull disc out that is jammed against other disc. Now eject all discs and replace lid. Unit should now function fine. Have had several hundred trouble free disc changes since. Will check spare radio when I find it for number of screws and take pics. Hope this helps and saves people some money.