Drayvn

Had a couple guys while walking by said mine was a Zonda...

Wow!

Exactly how my footwork is when i go to work in the mornings...

I spent about 5-6 hours on it last night and got to the part where I was the character Trevor, I might delete it and start again I think I missed out on quite a bit in Los santos

You can change between characters as you like except for the start of the trevor story missions.

And you won't miss anything as any missions or events wont carry on until you complete them.

one reviewer wrote

 

"It may be entertaining, particularly to young men with a penchant for such nihilistic spectacle, but the sensibility to which it appeals is warped, jaded and riddled with the deepest, blackest despair.

The fact that this is the most popular computer game on the market should make us all shudder, and pray that the violence on the screen doesn’t bleed into Britain’s streets."

*FACEPALM*

Haven't played a GTA game for a while. Will probably get this one to see what they're like now, But what I REALLY want is Battlefield 4!

Yes to BF4! But GTA 5 Online is going to be soooo good

You do realise this is going to be pants compared the first one, already theyve had to tone it down to a pg13

Theres a few niggles, explosion which renders Murphy badly wounded - instead of crappy thugs blowing his limbs off

Suit looked cool at first, updated version of the original, fantastic... until they went with all black

PG13?!?!?

I still do hope for the best on this one, great director, good cast, lets hope it lives up to the original ( i doubt it but hopefully it'll come close)

Front or Rear...Rear is fine, but if you buy from the USA the fronts the bean will shine to the wrong side of the road.. :scare:

As he sells worldwide i do believe he makes sure to have the correct beams on the his lights.

Circa £1900.00 gets you a front and rear kit...

 

Is it not an extra £100 if you want the rear discs to make use of the OEM handbrake shoes?

 

Handbrake shoes? do we not have caliper n discs at back?

Our handbrake uses shoes round the axle hubs i believe. The handbrake doesnt use the caliper or brake discs

I'm with StevoD here, i've got Varrstoen wheels as i wanted something like the te37's but i could in no way afford to spend 1k a wheel!

But at the same time i won't ever plaster any Volk stickers on them, they are Varrstoens through and through, nothing ever goes on my car unless it has a rightful place to be there, i don't want to fake something just to get the look, it has to have some other use to it as well.

I bought my carbon fibre wheels for my Daytona since, well, theyre carbon fibre! But it also reduces the unsprung mass, making a nimble bike feel like it's not even there, unfortunately it's still getting work done to it as everything except the chassis and engine is carbon fibre

But in the end 2 wheels cost me £2000! For a car the price increases to somewhere in the region of 4k a wheel alone!

I can understand ppl wanting to get their wheels or car wrapped or hydrodipped in carbon fibre, but even at a distance i could tell the difference between real and hyrdrodipped as it doesn't have that 3D effect that carbon fibre produces.

Sorry im in the party of if you want something to look carbon fibre, get it in real carbon fibre.

Got carbon fibre wheels for my Daytona 675!

Theres extra costs in it too, if you even want to see it in the flesh, you'll have to get a flight over, or go by a ferry. So can be very costly just to have a look, this is the problem of our island if you want to sell anything off island, people get put off by the travel as they fear that they might not like what theyre looking at and the wasting of £300 to £400 to get over here and back.

Good luck to the guy who is trying to sell it but it's going to be a difficult sale especially when you can get ones like mine which is an HR for 10k!

Just wanted to bring your attention to this...

http://www.bluchip.gg/carsales/car_350Z-Nissan_29_0_index.php

It was sold a few months ago i believe for under 10k

I'm thinking the guy who bought it really had no clue what he was buying!

He's probably checked on here and realised he was ripped off.

The buyer is having a laugh if he can just whack on another 5k!

This has got to be nearly as bad as that Veilside 350Z which keeps getting posted on Ebay...

This is from where i live, and been watching this car for years wondering where the guy has come up with the price.

Seen it driving around recently too, i don't know about anyone elses tastes but jeez that wing is sickening

http://www.ebay.co.uk/itm/Mint-2003-Nissan-350Z-ST-2003-/130971224856?pt=Automobiles_UK&hash=item1e7e7e4b18

Oh well!

I don't think you can get 10mm bolt on spacers.

Got a set of 10mm bolt on spacers from Eibach when i fitted my wheels, tho they were £100 per pair!

Whenever i park i always make try and get my side tight against the side of the parking space, so even tho it's a squeeze for me to get out i know theres lots of room for anyone getting out of their cars on the other side

How is she sounding now?

Hope it's everything you were expecting and more!

I bought some 2nd hand HFC's off Mark from Abbey with the flanges changed to fit the HR engines... Unfortunately one of the filters fell apart in the cat so we took them apart and got rid of them, so technically theyre resonated?

Anyway... it sounds even more brutal!

Anyone know the width of the brembo front calipers?

Been searching high and low all over the internet and can't find any specs on the width of them.

Fantastic cars, this was one i was looking at too before the zed.

Go to monkfish performance website, there's a whole load of tuning stuff for them, probably could spend upwards of 30k!

Walkinshaw even do superchargers with warranty too!

And the bi-modal exhaust is exquisite.

I usually stay away from anything branded with Nismo, even if i really like the styling, pretty much based on that my car didn't come as standard as a Nismo.

I don't like my car wearing something it's not entitled too, and i usually like to buy stuff that has at least 2 uses, makes me feel like the part is being used effectively, and most parts that are branded Nismo... are just for looks!

Yeah I got that exact same head unti a few weeks ago. I purchased all of my adaptors and fascias from incartech. The wiring looms work perfect first time. But be warned about the fascia adaptor, when I first fitted the head unit it would catch on the adaptor when you tilted the screen so to get around this I had to shave off some of the inner platic lip on the fascia, then I also had to put a washer behind each of the 2 top screws on the cars fascia that holds the unit in place, this in essence, tilts the head unit forward slightly which allows it to clear the fascia surround. Since then it has been fine. If you are using Android anda galaxy S4 then the you will need the extra android cable kit (about £70) but the MHL adapto from the kit wont work so you will need to buy a genuine Samsung MHL 2.0 adaptor (£37) and then it all works although slowly and not very responsive. If you have nay other phone, you should be fine.

Thanks everyone, and thanks jell36, just what i needed to know, i've got an S3 and i have all the necessary kit for cars with it so i should be fine on that front, but cheers for explaining the problems i'll be running into, i'll go ahead and order the things i need

Anyone able to point me in the right direction to get the right connectors and facia adapters for this particular model, im being a numpty and have looked through the help topics and don't want to buy something that isn't right!

Swissvax i use on mine, works a treat every time, expensive tho

As pointed out to me, the XYZ forms I to a single section through the tunnel mid way. So any issues in the decats won't show.

 

The TDX has a silencer which now fits in this space but pushed to one side. In order to reclaim from MD would mean testing with oem cats because that's how it was designed. If it doesn't fit thereafter clearly the MD have made an error.

 

Kindly Darren-B has lent me some spare cats he has and have already been packaged and checked in for collection tomorrow.

 

We shall see what happens, but I seriously believe CS from looking at how the Zorst sits.

 

Gota say though, the 4" tail pipes are friggin huge and I'll need to make some rear bumper modifications to accommodate.

Do you need any pics of my set up to see what yours should be like?

Any help i'll do the best i can to provide, But yeah, if the cats are off even slightly then say goodbye to the rest of the exhaust fitting properly!

You'll love it im sure of it and it will fit with the OEM cats, i have some DE Cats from Abbey which had HR flanges fitted and mine is slightly off to one side, but still fits great as it does have a little bit of give in the design.