Adrian@TORQEN Posted June 10, 2015 Posted June 10, 2015 (edited) Finally, the TORQEN R spacers are now available for sale! Made from 7075-T6 forged Aluminium billet, which is virtually twice as strong in comparison with the 6061-T6 cast Aluminium used on other similar products. These are capable to withstand extreme levels of stress (track, racing, rally, drifting etc), but also to any normal road use. The normal cast 6061-T6 Aluminium wheel spacers can only be used in low stress environment because of the bad mechanical performance of the recycled Aluminium used in manufacturing them, which may pose a safety threat to the driver. Forged is also 1.2 times more expensive than the casting. The studs are SCM435 steel with a strength of 10.9 grade, being Limited Life Range Tested (1 Million Times) and SGS certified. Lug nuts are made from 45# Steel with a strength of 8 grade. Anti-Rust level is 72 hours NSS test, which generally means that products passing this test will not rust within the first 6 years of use. Machining precision: Circularity: 0.02mm, Perpendicularity: 0.03mm, Parallelism: 0.03mm, Concentricity: 0.04mm, PCD true position: 0.02mm The TORQEN R spacers are hard anodising surface treated, in black. 25mm and 30mm come with knurling on the side as in the photos. Available in 15mm, 20mm, 25mm and 30mm. Custom sizes available on request. £129 per pair 15mm TORQEN R spacers 20mm TORQEN R spacers 25mm TORQEN R spacers 30mm TORQEN R spacers Edited October 22, 2015 by octet@TORQEN Quote
jimmy.farrow7 Posted June 10, 2015 Posted June 10, 2015 Put me down for a set of 15mm & 20mm when i get paid next!!. My monthly target is to buy at least 1 mod from you lol Quote
Adrian@TORQEN Posted June 10, 2015 Author Posted June 10, 2015 :lol: I liked that, ha ha! OK, 15mm and 20mm reserved for you, will PM you invoice in a minute Quote
BeefyZ Posted June 11, 2015 Posted June 11, 2015 Torqen I will drop you a message when I want them is that alright mate doesn't matter if I have to wait for stock that's no problem okay mate thanks a lot Don't put any aside until I PM you mate if that's alright 👠Sent from my iPhone using Tapatalk Quote
Adrian@TORQEN Posted June 17, 2015 Author Posted June 17, 2015 (edited) 25mm sold out. Edited July 1, 2015 by octet@TORQEN Quote
Adrian@TORQEN Posted July 1, 2015 Author Posted July 1, 2015 15mm, 20mm and 30mm spacers in stock. Quote
CJRamze Posted July 8, 2015 Posted July 8, 2015 What sort of spacers would you run front and rear on a 350z with stock Rays? 20 and 25? This is my first foray into 350z spacers Quote
Bodyboarder81 Posted July 8, 2015 Posted July 8, 2015 What sort of spacers would you run front and rear on a 350z with stock Rays? 20 and 25? This is my first foray into 350z spacers 20/30 looks good imo Quote
Adrian@TORQEN Posted July 28, 2015 Author Posted July 28, 2015 A few 15mm, 20mm and 30mm in stock until next batch arrives sometime end of September. Quote
Adrian@TORQEN Posted August 16, 2015 Author Posted August 16, 2015 For serious track days guys, grab a pair of the strongest wheels spacers! Quote
carquake Posted September 11, 2015 Posted September 11, 2015 I have 19 rays 275 35 tyre would 30mm rear spacer be ok or look a bit OTT in ur opinion and prob 20mm front Quote
Adrian@TORQEN Posted September 16, 2015 Author Posted September 16, 2015 20mm F and 25mm R I'd say. Quote
Adrian@TORQEN Posted October 22, 2015 Author Posted October 22, 2015 These are still in stock, lower price, £129 now! Quote
Adrian@TORQEN Posted December 15, 2015 Author Posted December 15, 2015 Only 3 sets left from this batch! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.