Jump to content

Recommended Posts

Posted

I know some have you have done this , and I'm think in while mine is in the body shop , might do this , who supply's ? And also isit hard to wire ?

 

 

Sent from my iPhone using Tapatalk

Posted

That picture was from my car about 4 or 5 years ago.

 

Just look on ebay for 350z LED Reflectors.

 

However i used to make my own and briefly sold them. If you're handy with a soldering iron these are really easy to make yourself. I say easy, they were a good 3 hours work per pair to make, hence why i binned the idea off as i was only making about £30 profit per unit. It was more of a hobby than a money making scheme.

 

http://www.350z-uk.com/topic/67074-led-reflectors/page__hl__reflectors

Posted (edited)

It's easy to do about 3hours with pulling the bumper off as well

I got my ones second hand iv got a pic off them in my build trend

a7abaru8.jpg

 

Sent from my iPhone using Tapatalk

Edited by Briggsybriggs1
Posted

Ive been wanting to do this to mine ! Even though the Z has aged gracefully I think these modernise the Z without looking tacky ! :) might be next weekends project

 

 

Sent from my iPhone using Tapatalk

Posted
That picture was from my car about 4 or 5 years ago.

 

Just look on ebay for 350z LED Reflectors.

 

However i used to make my own and briefly sold them. If you're handy with a soldering iron these are really easy to make yourself. I say easy, they were a good 3 hours work per pair to make, hence why i binned the idea off as i was only making about £30 profit per unit. It was more of a hobby than a money making scheme.

 

http://www.350z-uk.com/topic/67074-led-reflectors/page__hl__reflectors

 

Where did you buy your LEDs from. :) ?

 

 

Sent from my iPhone using Tapatalk

Posted
That picture was from my car about 4 or 5 years ago.

 

Just look on ebay for 350z LED Reflectors.

 

However i used to make my own and briefly sold them. If you're handy with a soldering iron these are really easy to make yourself. I say easy, they were a good 3 hours work per pair to make, hence why i binned the idea off as i was only making about £30 profit per unit. It was more of a hobby than a money making scheme.

 

http://www.350z-uk.c..._hl__reflectors

 

Where did you buy your LEDs from. :) ?

 

 

Sent from my iPhone using Tapatalk

 

eBay. £5 for 50. You need to get some resistors too, relative to the LED's you buy. I used to use the calculator, below, to work out what voltages i needed etc:

 

http://led.linear1.org/led.wiz

  • Like 1
Posted
That picture was from my car about 4 or 5 years ago.

 

Just look on ebay for 350z LED Reflectors.

 

However i used to make my own and briefly sold them. If you're handy with a soldering iron these are really easy to make yourself. I say easy, they were a good 3 hours work per pair to make, hence why i binned the idea off as i was only making about £30 profit per unit. It was more of a hobby than a money making scheme.

 

http://www.350z-uk.c..._hl__reflectors

 

Where did you buy your LEDs from. :) ?

 

 

Sent from my iPhone using Tapatalk

 

eBay. £5 for 50. You need to get some resistors too, relative to the LED's you buy. I used to use the calculator, below, to work out what voltages i needed etc:

 

http://led.linear1.org/led.wiz

 

Cheers for the info ! Il have a nosey on ebay now

 

 

Sent from my iPhone using Tapatalk

Posted

Is say 10mm would be huge , but be nice and bright ðŸ‘, what eles you need apart from the LEDs , resister ?

 

 

Sent from my iPhone using Tapatalk

Posted

Mine were 8mm on the examples below, which i think are the perfect size.

 

Note you will have to dremmel down the backs of those holders as they're deeper than the reflector.

 

You need to secure the holders in the reflectors with glue, but not superglue as it reacts with the plastic. I use 'serious glue' which they sell in Wickes for a few quid.

 

Lastly, i always filled mine with clear silicone sealant to waterproof them, before sticking the back of the reflector back on top (which i'd previously dremmelled off.)

 

IMG_0008_zps55a1a391.jpg

 

IMG_0010_zpscc197e56.jpg

 

IMG_0014_zpsbbeb1124.jpg

  • Like 1
Posted

Thanks for the tips and tricks ! I will be sure to post a few pictures of progress and completion ! Looking to do this next weekend when i have some free time ! This weekend im going to service the zed and get it ready for banzai at crail wooo :)

 

 

Sent from my iPhone using Tapatalk

  • 1 month later...
Posted

Haha, from ZLEDS? Make sure you're sitting down when he replies, the price of his stuff is incredible! The quality is brilliant, but its hundreds of dollars usually for anything ZLEDS.

 

If anybody wants a set from me drop me a PM. I have a SINGLE set ready and it will be sent out as a test unit. I already have one of these 'in the wild' so to speak, sold a set to another member a little while ago, but want to get another one out there to ensure thay all works as expected. Was going to fit them to my car, but hey-ho.

 

First come first served, as I say its only a single set at the moment, these aren't for sale to everyone yet, need to make sure they last and work as expected.

Posted (edited)

I believe that the ones in the bottom video were sold as "used" after for around 365 USD by ZLEDs,

 

Do you have any photos of the ones that you have made?

Thanks

 

update:

I managed to find a recent price list on ZLEDs website for different spec's of front LED, the ones in the 2nd video appear to sell for around £310 if im correct, that does not include shipping and you mail in the reflectors for him to work on..

Edited by Martinjj
Posted

I believe that the ones in the bottom video were sold as "used" after for around 365 USD by ZLEDs,

 

Do you have any photos of the ones that you have made?

Thanks

 

update:

I managed to find a recent price list on ZLEDs website for different spec's of front LED, the ones in the 2nd video appear to sell for around £310 if im correct, that does not include shipping and you mail in the reflectors for him to work on..

 

Plus import tax when they land in the country! If you are interested I can supply you personally with some photos of mine, just drop me a PM.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...