MickJ Posted July 23, 2007 Posted July 23, 2007 Sorry if in wrong section - you may have seen my post about the brick through my windscreen and then ending up on the bonnet and leaving a few chips and one small scratch, I have just touched it all in with a 'touch up' stick which has obviously left paint proud of the surface, when dry I was going to 'wet & dry' it flush and then repolish it, what is the minumum grade can you recommend that will do the job? TIA Mick Quote
M13KYF Posted July 23, 2007 Posted July 23, 2007 try this stuff. works a treat http://www.frost.co.uk/item_detail.asp?productID=8221 Quote
MickJ Posted July 23, 2007 Author Posted July 23, 2007 try this stuff. works a treat http://www.frost.co.uk/item_detail.asp?productID=8221 looks good, but seeing as I have already touched up would a time difference of days make any difference to their recommended 45-90 mins, allowing for delivery etc? Quote
M13KYF Posted July 24, 2007 Posted July 24, 2007 try this stuff. works a treat http://www.frost.co.uk/item_detail.asp?productID=8221 looks good, but seeing as I have already touched up would a time difference of days make any difference to their recommended 45-90 mins, allowing for delivery etc? don't know, try it, at least you've got for the next time. The recommended time they state on the instructions is at least 2hrs but prefer 4hrs. So paint is pretty well set by then. Quote
MickJ Posted July 26, 2007 Author Posted July 26, 2007 Well I have been trying this stuff out and can comfirm that it will still do the job 36 hrs later after applying the paint, got to admit I was a little sceptical with the claims but have to say it does 'what it says on the tin' it has taken a few applications of touch up paint to the scratch and the chips but it is getting harder to see them. Quote
M13KYF Posted July 26, 2007 Posted July 26, 2007 use the stuff myself, but found it's not so good on the plastic painted parts Quote
MartinGT Posted December 23, 2007 Posted December 23, 2007 bit late, but if you're going to flat paint touch ups i tend to use 2400, cos i have it and cos its not too abrasive, plenty of water and once buffed up you cant see the chip. Quote
MartinGT Posted December 23, 2007 Posted December 23, 2007 i'm just bored and reading through the forum Quote
Sarnie Posted December 23, 2007 Posted December 23, 2007 i'm just bored and reading through the forum Only playing with ya PS: Sig needs to be 500 X 100 or the mods will cry.......... Quote
MartinGT Posted December 23, 2007 Posted December 23, 2007 sod the mods i cant be ****ed with that petty stuff, 95% of people have broadband nowadays, if you cant run an ordinary forum on your tinternet you'd be as well as not trying! Quote
MartinGT Posted December 23, 2007 Posted December 23, 2007 i'm gonna get in trouble now aren't i Quote
Sarnie Posted December 23, 2007 Posted December 23, 2007 i'm gonna get in trouble now aren't i yep Its nothing to do with internet connections, summat about ''it looks nicer that way'' Quote
MartinGT Posted December 23, 2007 Posted December 23, 2007 nicer smicer its late aint it, talking pish now Quote
Sarnie Posted December 24, 2007 Posted December 24, 2007 nicer smicer its late aint it, talking pish now Its christmas eve Quote
MartinGT Posted December 24, 2007 Posted December 24, 2007 i haven't even looked under the tree yet, i must be getting old. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.