scotthiddlestone Posted February 16, 2012 Posted February 16, 2012 hi there ive got a small problem and getting 2 conflicting answers from the rim seller and the tyre fitter,i have a set of 19"x9.5 all round rims,they now sit flush after the removal of the small hub bolt,my concern before i buy 245/35/19 tyres is that there is only 2cm clearance between the back of the rim and the upright behind it,further to this the upright curves in after 5 cm,the outer rim is just outside the edge of the arch all of this is when the car is jacked up,when the car is off the jack will i have all round clearance,i have read alot of guys run 19"x9.5s so it would be heartening to hear from them if they run them on the front or 19"x9s.cheers Scott
MidnightRacer Posted February 16, 2012 Posted February 16, 2012 Offset is all important here so it might be worth listing that too!
hadZ Posted February 16, 2012 Posted February 16, 2012 I have 19x10 et20 on the front with 255/35 tyres with no problems...
Lexx Posted February 16, 2012 Posted February 16, 2012 Why did you start a new thread for essential the same problem that you have a 2 page thread already running for? Please continue any discussions on the original thread: viewtopic.php?f=61&t=58567
Recommended Posts