seamybaby Posted September 11, 2011 Posted September 11, 2011 Well after buying mt 350z in July i have been doing little bits and pieces to it,so thought i would start a thread about the mods i have carried out and give as much info as possible... Car is December 2006 facelift with usual gt spec and factory sat nav..... first pics are when i got the Z..... Quote
seamybaby Posted September 11, 2011 Author Posted September 11, 2011 First thing i decided to do was a little bit of vinyl wrap carbon look.....roof,b pillars and front reflectors all wrapped in 3m vinyl......cost £200. Quote
MadGrip Posted September 11, 2011 Posted September 11, 2011 Did the reflectors need remving to get them wrapped? I've done the roof & pillars but like the look of the reflectors Cheers Phil Quote
seamybaby Posted September 11, 2011 Author Posted September 11, 2011 yes had front bumper off for a respray,so just removed them then and wrapped them....dont think be possible to do them in place...... seamy Quote
seamybaby Posted September 11, 2011 Author Posted September 11, 2011 Next up was exhaust system......was not sure what way to go here,so i thought start at the front and work my way back....... Got decat pipes from america,off ebay...have to say quality of stainless is great(i should know i work in the aircraft industry) ordered weds arrived sat morning total cost inc shipping...£109 Fitted perfectly with no issue......o yes cel lights on....lol Quote
wackosr Posted September 11, 2011 Posted September 11, 2011 Looking good buddy. Nice spot of wrapping. Quote
Darren-B Posted September 12, 2011 Posted September 12, 2011 Looking good, I do like the wrapped reflectors,. There is someone on here that does the spacers for the O2 sensors to stop the cel lights, Or you could get the uprev remap, I'm pretty sur they can stop the lights coming on with that . Quote
seamybaby Posted September 12, 2011 Author Posted September 12, 2011 Next up was the y pipe...ordered it off same guy as the decats....another ebay item......3 day delivery again.......total cost inc delivery was....£129......he has a shop on ebay jdmhondaparts is his username....... Another quality item and fitted perfectly..as per decat pipes came with all gaskets and bolts to fit... Really wakens the engine up and produces a nice note above 4000rpm.... Quote
northernmonkey Posted September 13, 2011 Posted September 13, 2011 Looking good. Does anybody know if these pipes will fit onto my existing scorpion rear section? Mike Quote
seamybaby Posted September 14, 2011 Author Posted September 14, 2011 They will fit perfectly chum........ Quote
seamybaby Posted September 14, 2011 Author Posted September 14, 2011 Next up was a popcharger......read alot of mixed reports about these and decided to go for one anyways..... Swapped with another member on here...dannyboy...for his JWT for my 06 airbox. Really smooth transaction cheers chum...... Fitted perfectly with no issues....... Reminds m2 of my little crx vtec now when you give it the beans.....god i loved the 90s. seamy Quote
seamybaby Posted September 19, 2011 Author Posted September 19, 2011 Next up was a little bit of lowering...got a set of springs of the guys at cougar store thanks guys.... Apex 30mm easy fitment and cost £80 inc post and packing...used springs.... no pics forgot to take them....lol Quote
seamybaby Posted September 19, 2011 Author Posted September 19, 2011 Last up for the time being...spent enough recently... Sold the LMGT4 wheels to another member on here,thanks Adrian Replaced them with Rota GTR Wheels...19x10 all round with a et20 offset............. Heres a few pics with the lowering springs also in place..............o and a new crbon stubby aerial to finish off. Quote
seamybaby Posted September 20, 2011 Author Posted September 20, 2011 Day off today so i thought i would give this carbon vinyl wrap ago................ Decided to wrap the rear strut brace cover....so nipped round to the man that doed the wrapping and bought a bit of 3m vinyl wrapof him for £10....... Removed item and cleaned with alcohol...not corona or vodka...lol Removed film and applied to cover,heated up the little indents with a hairdryer and pushed the vinyl into them....really surprised myself how easy it was to do....... Start to finish 1 hour. Pics Below Quote
jollyranchers Posted September 20, 2011 Posted September 20, 2011 very nice , how do you find the ride with the 19's ? , how heavy are these compared to the rays ? does the car feel any slower with these on ? Quote
MITZ@CougarStore Posted September 20, 2011 Posted September 20, 2011 Zed looks great, Seamy, glad the springs reached you safely... Quote
seamybaby Posted September 20, 2011 Author Posted September 20, 2011 very nice , how do you find the ride with the 19's ? , how heavy are these compared to the rays ? does the car feel any slower with these on ? rides perfect on the 19s chum.....no idea in the weight difference to be honest...do you mean slower as in if i had went from 18 to 19s? seamy.............. Quote
seamybaby Posted September 20, 2011 Author Posted September 20, 2011 Zed looks great, Seamy, glad the springs reached you safely... Yeah super chum many thanks Quote
ChrisUUC Posted September 20, 2011 Posted September 20, 2011 Nice one buddy ... gonna get some bits wrapped myself Great zed as ive said before. Quote
jollyranchers Posted September 21, 2011 Posted September 21, 2011 very nice , how do you find the ride with the 19's ? , how heavy are these compared to the rays ? does the car feel any slower with these on ? rides perfect on the 19s chum.....no idea in the weight difference to be honest...do you mean slower as in if i had went from 18 to 19s? seamy.............. yeah , normally they are a bit heavier when you go up a size which in the past i have noticed the car doesnt feel as perky Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.