carlhambrey Posted May 24, 2011 Posted May 24, 2011 hi everyone, i have just bought a 2003 350z import from scotland and drove it 500 miles back to my home with no problems what so ever, alas today (day two of owning it ) i took it out in slow moving traffic and as i am coming towards a corner or junction the car is stalling with the "tcs off" light and the "slip" light and the engine light all coming on together, the engine is still running but there is no power and when i press the accelerator i dont get anything above 2000 revs and it limps along at about 2 mile an hour! i then can turn the engine off and restart it and i get full revs. i am worried i have bought myself a whole load of trouble, can any one reassure me, i will take it for a service but was assured by the seller that this had just been done. thanks carl Quote
Maccaman Posted May 24, 2011 Posted May 24, 2011 Have you accidently hit the snow button? This will put the car into limp mode. Quote
martinmac Posted May 24, 2011 Posted May 24, 2011 Hi bud, soory you are having problems. Where abouts are you. Quote
carlhambrey Posted May 24, 2011 Author Posted May 24, 2011 Have you accidently hit the snow button? This will put the car into limp mode. snow button!! didnt know it had one. its a manual transmition does this make a difference Quote
carlhambrey Posted May 24, 2011 Author Posted May 24, 2011 Hi bud, soory you are having problems. Where abouts are you. kidderminster mate, west mids. Quote
Maccaman Posted May 24, 2011 Posted May 24, 2011 Just checked & think this is only on the auto JDM. Quote
carlhambrey Posted May 24, 2011 Author Posted May 24, 2011 thanks for your trouble guys but i think this is just for autos as my wife drives one and she has a snow button , i have been searching these forums and it seems that it could be the way the spark plugs have been put in!! or a faulty sensor which is just my luck,.................buy a car for the most i could afford and then have to have it serviced and get a nice big bill. i have checked the brake fluid and its fine, the oil is a bit low which tells me this car has not been for a service after all so looks like that is my best course of action. Quote
narcotix Posted May 25, 2011 Posted May 25, 2011 If the CEL is on then I would recommend that you have the error code read before doing anything else ... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.