HassanZ Posted May 10, 2011 Share Posted May 10, 2011 Hi all, As mentioned previously on intending to wrap my B-pillars, I have finally completed the task! Thanks to Rich (RTBiscuit) for taking the time out on advising and helping me, I really appreciate all of his help! I removed the rubber weather strips off the pillars before I wrapped them, then used adhesive glue and stuck them back on. Is it necessary to re-apply the weather strips or are they not important? The strips are starting to peel slightly as the glue didn't stick properly. Shall I remove the weather strips completely or stick them back on as they are needed? Photos below: Many Thanks, Hassan Quote Link to comment Share on other sites More sharing options...
narcotix Posted May 10, 2011 Share Posted May 10, 2011 Looks like you've done a good job on them! They look cool Quote Link to comment Share on other sites More sharing options...
MadMac Posted May 10, 2011 Share Posted May 10, 2011 That does look very good Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted May 10, 2011 Share Posted May 10, 2011 Good work, happy to help, i hope its given you more confidence to try more parts. Quote Link to comment Share on other sites More sharing options...
richt Posted May 10, 2011 Share Posted May 10, 2011 Quote Link to comment Share on other sites More sharing options...
Stu350z Posted May 11, 2011 Share Posted May 11, 2011 Looking dude! Quote Link to comment Share on other sites More sharing options...
HassanZ Posted May 11, 2011 Author Share Posted May 11, 2011 Thanks everyone It wasn't as hard as I thought it would be! They do make a massive difference to the appearance of the car, especially because it's grey Quote Link to comment Share on other sites More sharing options...
HassanZ Posted May 11, 2011 Author Share Posted May 11, 2011 Good work, happy to help, i hope its given you more confidence to try more parts. I really appreciate your help Yes it definitely has! I'll probably end up purchasing some vinyl off you for other bits and bobs in the future Is it necessary to re-apply the weather strips or do people just apply the B-pillars without them? Can it cause any leaks or anything? Many Thanks, Hassan Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted May 11, 2011 Share Posted May 11, 2011 i only put it back on so people have an oem look, personally i don't deem it neccessary but do it for the customer. Quote Link to comment Share on other sites More sharing options...
HassanZ Posted May 12, 2011 Author Share Posted May 12, 2011 i only put it back on so people have an oem look, personally i don't deem it neccessary but do it for the customer. Ah...I had the impression it was an important component of the B-pillars. I would have not gone through the hassle of fitting them if I knew before Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted May 12, 2011 Share Posted May 12, 2011 i only put it back on so people have an oem look, personally i don't deem it neccessary but do it for the customer. Ah...I had the impression it was an important component of the B-pillars. I would have not gone through the hassle of fitting them if I knew before at most it makes the water bead from b pillar on to the glass and keeping it away from the glass seal (edge of the glass) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.