UNABASHED Posted March 20, 2011 Posted March 20, 2011 I undid he bolt on top of wiper and the 3 underneath, but it doesn't seem to want to go any further than that! Is there a knack to this, do i just pull it off of does it need to be screwed off??? Quote
UNABASHED Posted March 20, 2011 Author Posted March 20, 2011 done! That was a bytch to get off!!! Quote
Clarkie Posted March 20, 2011 Posted March 20, 2011 I had to unscrew mine off, know this is a little late but may help anyone else doing this Quote
UNABASHED Posted March 20, 2011 Author Posted March 20, 2011 I had to pull on it to near breaking point and it suddenly 'snapped' form its stuck position so i could screw it off. Quote
ChrisS Posted March 20, 2011 Posted March 20, 2011 It should not screw off , it's a conical spline. Protect your paint work with cloths. Place something (bit of thin wood/plastic) on the cloth and prise it up with a none sharp length of something. I used a large screw driver (placed on wood as a fulcrum) and was very very carefull. The alloys will have corroded together. Sorry for all the somethings, but you get my drift. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.