Painted Handles

[buster]

How easy is it to remove the handles or could this be done on car with sum proper masking?

 

Would you: rub down and red prime then black up with and fin with laquer?

 

Thanks

 

 

theres a thread on here thats tells you how to remove them.i personnally removed mine and sprayed em.i wouldnt recommend even trying to do the job on the car m8.

[Shaun1982]

I'm with buster on that cos you need to shoot them handkes from all directions really. I wedged a ball of tape in mine so the handles stayed nearly fully open so none got missed. As far as prep goes I stotched mine, panel wiped,then a dust cost of etch primer followed by a thicker coat then a tickle with a 1000 disc by hand. Then I stuck them in the booth with a load of Panther black focus bumpers to be painted

[cookiemonster]

As far as prep goes I stotched mine, panel wiped,then a dust cost of etch primer followed by a thicker coat then a tickle with a 1000 disc by hand.

 

???

[Shaun1982]

Rub it with rough spongy stuff,wipe it clean,spray it lightly,spray it again then gently rub it with a fine disc

 

How's that? Lol

[rtbiscuit]

i used 2 triangles of wood, like baby door wedges to pin the handles in the open position for painting.

 

shoved them in underneath and then taped over.

[cookiemonster]

Rub it with rough spongy stuff,wipe it clean,spray it lightly,spray it again then gently rub it with a fine disc

 

How's that? Lol

 

 

Well that seems far simpler

[Shaun1982]

its not difficult really mate. I'd like to have a go in the booth myself though so I've done the full job from start to finish