Can anybody confirm....

[Cragus]

...if I have bought the correct eibach spacers for the standard rays? Please tell me I have because i bought both sets and if the are not the correct ones it has not turned out to be such a bargain

[Cragus]

I think i have as the PCD bolt pattern matches according to this web site?..

 

http://www.wheelspecs.com/Nissan-350Z-Track-(Front)_wm1749.aspx

 

..and they definately don't look like the ones where i have to replace my existing bolts with longers ones.

 

Put me out my misery!

[3FIDDYZ]

Yep PCD is right and 20mm should be fine too

[SunGodRA]

Cant see as the listing has ended and the other site isn't working.

There are basically 2 types of spacer, one simply bolts on and the other uses longer bolts which need tapping in

[Cragus]

Cant see as the listing has ended and the other site isn't working.

There are basically 2 types of spacer, one simply bolts on and the other uses longer bolts which need tapping in

 

I knew there were 2 types and I have learned on here that 20mm is the optimum size to fill the arches. I just wasn't completely sure if the PCD was correct. Although, I hope these are the bolt straight on efforts - can't be arsed tapping! If you scan down the page, even though auction has finished you can still see them sungod.

 

Thanks 3FIDDYZ! Gotta love a bargain. Do you think they are the straight bolt on efforts?

[SunGodRA]

you paid £50 per pair

[geoff-r]

Looks like a bargain!

[SunGodRA]

Looks like a bargain!

 

Damn right! - I paid £160 for all corners second hand!!!

[Cragus]

Giggity giggity.......just have to hope they are straight bolt on now!

[rich5259]

There's a set of 4 x 20mm spacers for an SX200 (same pcd of 114.3) for £105 delivered http://cgi.ebay.co.uk/Nissan-200-SX-Alloy-Wheel-Spacers-20mm_W0QQitemZ140353442196QQcategoryZ72257QQcmdZViewItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BIEW%252BFICS%252BUFI%26otn%3D10%26ps%3D63%26clkid%3D7886465489595696297

[Cragus]

There's a set of 4 x 20mm spacers for an SX200 (same pcd of 114.3) for £105 delivered http://cgi.ebay.co.uk/Nissan-200-SX-Alloy-Wheel-Spacers-20mm_W0QQitemZ140353442196QQcategoryZ72257QQcmdZViewItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BIEW%252BFICS%252BUFI%26otn%3D10%26ps%3D63%26clkid%3D7886465489595696297

 

 

Yeah, but they are not eibach which most people on here recommend. Been advised this is definately a part you don't want to go cheap on!

[rich5259]

There's a set of 4 x 20mm spacers for an SX200 (same pcd of 114.3) for £105 delivered http://cgi.ebay.co.uk/Nissan-200-SX-Alloy-Wheel-Spacers-20mm_W0QQitemZ140353442196QQcategoryZ72257QQcmdZViewItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BIEW%252BFICS%252BUFI%26otn%3D10%26ps%3D63%26clkid%3D7886465489595696297

 

 

Yeah, but they are not eibach which most people on here recommend. Been advised this is definately a part you don't want to go cheap on!

 

i was looking at the ultralite ones at £80 for 2 (so £160 a set of 4) as my new (yet to be fitted) wheels are ultralites

[D4XNY]

I have ultralites all round, and seem to do the job fine

[Cragus]

Hey guys.

 

Was sitting bored tonight so after reading a post, decided to measure the bore (part that sits against the wheel) of the Eibach spacers I bought. It was 7cm dead. Does this mean that they won't fit the standard Rays?

 

The part number is 90-4-20-016. I will be gutted if they wont as I have bought two sets of these .

 

If they won't, I may have two sets of Eibach spacers up for sale for people who have rims that can take a slighty bigger bore - either that or il be sending them back.

[Cragus]

Anyone...?