jay3032 Posted August 4, 2009 Share Posted August 4, 2009 Ive just bought a standard spoiler and am looking to fit it, whats best drilling or 3m tape? Thanks Quote Link to comment Share on other sites More sharing options...
Macdaddy Posted August 5, 2009 Share Posted August 5, 2009 If your too worried to drill i'd suggest using the bonding compound bodyshops use. Dont use 3m tape as it'll eventually deteriorate as it gets wet. Quote Link to comment Share on other sites More sharing options...
jay3032 Posted August 5, 2009 Author Share Posted August 5, 2009 If your too worried to drill i'd suggest using the bonding compound bodyshops use. Dont use 3m tape as it'll eventually deteriorate as it gets wet. Thanks, any idea where I can get some bonding compound? Quote Link to comment Share on other sites More sharing options...
srobrien Posted August 5, 2009 Share Posted August 5, 2009 You can buy tigerseal from ebay and it goes in a mastic gun, you could use tape until you get some. http://cgi.ebay.co.uk/Black-Tiger-Seal- ... 286.c0.m14 R Quote Link to comment Share on other sites More sharing options...
M13KYF Posted August 5, 2009 Share Posted August 5, 2009 factory fitted ones are both drilled and 3M taped Quote Link to comment Share on other sites More sharing options...
Macdaddy Posted August 5, 2009 Share Posted August 5, 2009 You can buy tigerseal from ebay and it goes in a mastic gun, you could use tape until you get some. R Thats the stuff. Quote Link to comment Share on other sites More sharing options...
johnnywas Posted August 5, 2009 Share Posted August 5, 2009 Get tigerseal,turps seems good for wipeing away any excess and for cleaning up,sometimes best to use some maskingtape to hold you'r spoiler in place till the tigerseal has cured,oh and mind and clean of any polish or wax from your hatch before you try to fit.. Quote Link to comment Share on other sites More sharing options...
jay3032 Posted August 5, 2009 Author Share Posted August 5, 2009 You can buy tigerseal from ebay and it goes in a mastic gun, you could use tape until you get some. http://cgi.ebay.co.uk/Black-Tiger-Seal- ... 286.c0.m14 R Thanks for your help mate, just ordered some, think im going to make a template, drill and bolt and also bond it Quote Link to comment Share on other sites More sharing options...
3FIDDYZ Posted August 5, 2009 Share Posted August 5, 2009 Should be a template online somewhere, may want to try the US site. you may want to contemplate putting a dab of grease on the screw holes on the spoiler, place the spoiler on the boot, wait a few secs and then lift strait up, should leave a removeable mark on the spoiler where the screw holes should be.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.