Martin W Posted March 16, 2009 Share Posted March 16, 2009 I had a better idea. follwoing from thread http://www.350z-uk.com/forum/viewtopic ... highlight= Photo below shows the high point of my coolant system. The instructions for my coolant system mods say to undo the Tee and fill slowly from the Radiator until fluid spills out from this pipe. Then connect everything up. So rather than a reservoir, If i could get another Tee piece one with a valve on the upright and capable of accepting some clear hose. I could fill from this point, and use it as a bleed point to get rid of the last remnants of air in the system. Any better ideas? Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted March 16, 2009 Share Posted March 16, 2009 something like this attached to a T-Piece? http://www.plumbworld.co.uk/compression ... m-328-3942 Quote Link to comment Share on other sites More sharing options...
Martin W Posted March 16, 2009 Author Share Posted March 16, 2009 something like this attached to a T-Piece? http://www.plumbworld.co.uk/compression ... m-328-3942 I guess right in principle, maybe more from the aero world than plumbworld though! Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted March 16, 2009 Share Posted March 16, 2009 aero world....ok, how about these? http://www.autovalve.com/pages/bleed.htm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.