My 2dr track sierra with a VQ35 :)

[Jimmy86]

So I made the decision a couple of years ago when my old Ford V6 wasnt performing the way I wanted to swap in a complete 350z drivetrain into my Sierra track car.

 

Swap is done now. Was allot of work to make everything fit. Had to make all the stuff myself so took a good 3 years. 

 

But basicly diy longtube headers/complete exhaust, upper part of plenum+intake pipe, rear sump oilpan, engineloom since i went standalone ecu. Fuelrails, coolingsystem etc. Basicly heads and engine block are the only thing I didnt touch. Enlarge gearbox tunnel to make the cd009 fit. 

 

Going to dyno it 5-6 september. Clip of it from the other day. 

 

 

 

[Jimmy86]

I have buildthread on the swedish ford forum. In swedish of course but there is alot of pictures if anyone is interested. Sadly the forum flips my cellphone pictures all over the place so its kinda anoying.  

 

https://www.fordclubsweden.se/forum/viewtopic.php?f=26&t=84816&start=360

 

Sunday 6 is dynoday. I'llreport back then. Will be interesting to see how my headers and upper intake will  perform. Not runing a maf so intake is also alot bigger than stock aswell. (3.5" with 6.8" velocitystack). Still stock throttlehousing thou.

 

Regards Jimmy