Jump to content

Recommended Posts

Posted

Hello everyone,

 

I collected my first 350z recently, a car I have been eager to get for a very long time. 

 

However there are a few troubles with the car. It is misfiring bad, idling at around 2.5k RPM, then cutting out.

 

The car is a 2006 import. It has had a non rev-up engine swap at some point. 

 

It is showing error codes P1078, P1084, P0078 and P0084. (Which relate to the exhaust vvt solenoids and cam sensors) 

 

I can confirm that the previous owner had it running properly with this engine fitted so I don't believe it is a loom issue.

 

As the non rev-up VQ only has VVT on the intake side, any idea as to why these error codes could've popped up and how to resolve?

 

Thank you all in advance, really appreciate any tips or ideas. 

Posted

Hi and welcome along buddy, I can't help you out on your issues unfortunately, so good luck with your venture. I am sure some of the more knowledgeable members will be along soon enough to help you out. Let's see some pictures of your new cool whip though!

Posted

Did the ECU's get swapped too as they are different - I'd look here first

 

If not that then the symptoms also suggest low oil pressure, how does the oil pressure gauge look?

Posted
3 hours ago, Andy_Muxlow said:

Hi and welcome along buddy, I can't help you out on your issues unfortunately, so good luck with your venture. I am sure some of the more knowledgeable members will be along soon enough to help you out. Let's see some pictures of your new cool whip though!

Thank you for the warm welcome Andy.

Posted
1 hour ago, ZaneDylan said:

Did the ECU's get swapped too as they are different - I'd look here first

 

If not that then the symptoms also suggest low oil pressure, how does the oil pressure gauge look?

Hi Zane,

 

First of all thank you for the advice.

 

How would I check if the ECU’s have been swapped?

 

Oil pressure sits at 6 bar at 2k RPM upon start up, before cutting out. Does that seem normal to you?

 

Once again really appreciate the help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...