Zedrush Posted March 22, 2008 Share Posted March 22, 2008 No guys not what you think, lol, i got hubcentric spacers at the rear and there is like a not really vibrating but like wierd note from both my rear wheels when i drive off, its like a static noise best describes it, anyone know what it could be, then at high speeds dont hear anything, perhaps exhausts over bellows it lol is it the spacers or worse? bearings Cars only got 17k miles on it and hubcentrics only been on for 3 weeks so doubt the bearings have gone, when car was on the ramp and me and Andy rotated the wheels, there was like a clicking noise, the rear pads have still 3mm left which are being replaced very soon Quote Link to comment Share on other sites More sharing options...
tmJak Posted March 23, 2008 Share Posted March 23, 2008 i thought if the bearings were going it made a more whistling noise, and you only start to hear it above 30mph. think mine are going. . . Quote Link to comment Share on other sites More sharing options...
lomoto Posted March 23, 2008 Share Posted March 23, 2008 Take the calipers off and then spin the wheels, this will give a better idea of the noise Quote Link to comment Share on other sites More sharing options...
Andy Posted March 23, 2008 Share Posted March 23, 2008 I'm still putting my money on a slightly seized caliper but without taking it all apart it's hard to tell Quote Link to comment Share on other sites More sharing options...
GIXXERUK Posted March 23, 2008 Share Posted March 23, 2008 doubt its the bearings, they will drone when you corner did you get longer wheel bolts ? make sure these are tight and tighten them progressively, it sounds to me like they could be loose and creaking under the stress Quote Link to comment Share on other sites More sharing options...
H5 Posted April 1, 2008 Share Posted April 1, 2008 Anything touching the brake protector plate? Quote Link to comment Share on other sites More sharing options...
Zedrush Posted April 1, 2008 Author Share Posted April 1, 2008 Anything touching the brake protector plate? not sure bud am getting it checked out when I change my pads over Quote Link to comment Share on other sites More sharing options...
H5 Posted April 1, 2008 Share Posted April 1, 2008 Anything touching the brake protector plate? not sure bud am getting it checked out when I change my pads over Big Phil supplied Performance Friction?? Quote Link to comment Share on other sites More sharing options...
Zedrush Posted April 1, 2008 Author Share Posted April 1, 2008 Anything touching the brake protector plate? not sure bud am getting it checked out when I change my pads over Big Phil supplied Performance Friction?? yep get fitted this weekend with new brembos and stuff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.