Help with fittings needed oil pressure

[nissanman312]

I'm either ordering this gauge as I've been offered a great price on it

 

 

http://www.demon-tweeks.co.uk/motorsport/gauges-auxiliary/stack-pro-control-oil-pressure-gauge

 

 

Or the aem one of similar value

 

What I need to know is what do I need to plumb it off the factory point on the block

I think I need a t peice etc but no idea what sizes anyone help?

[Tricky-Ricky]

Should be 1/4"BSP the T on that page should be OK, the std pressure sensor may be a fine metric thread cant remember off hand but they should be able to recommend the correct size when you order.

[nissanman312]

Should be 1/4"BSP the T on that page should be OK, the std pressure sensor may be a fine metric thread cant remember off hand but they should be able to recommend the correct size when you order.

 

Awsome thanks dude

 

[Tricky-Ricky]

After a quick search apparently the block take off thread is 1/8"BSPT which is a taper thread, but most oil pressure gauge take offs are 1/4" or 1/8" bsp or bspt.

[nissanman312]

https://tapatalk.com/shareLink?url=http%3A%2F%2Fwww.the370z.com%2Fshowthread.php?t=34044&share_tid=34044&share_fid=26131

DIY: Oil Pressure Gauge

[nissanman312]

I found this seem legit?

[Richf]

yep looks right , you could take a feed off the sandwich plate if you have an oil cooler .

[nissanman312]

Yeah I have mishimoto thermostatic

Would this be as accurate tho?