350zPhil Posted January 5, 2016 Share Posted January 5, 2016 Right, I was under the car fitting Superpro bushings and noticed a leak coming from a 24mm plug, looks like a drain plug directly below the UJ. I found it was loose/not very tight so didn't think twice and got the spanner on it. When I finished and started the car I discovered that my steering was incredibly heavy/notchy/horrible. Couldn't think what else it could be so loosened the 24mm plug a little and power steering returned, as did the leak. Could someone tell me what it is I'm tightening/loosening and a rough idea about what to change to fix the leak and what torque to tighten it to during reassembly would be greatly appreciated. Also if its not meant to be done up tight what am I likely to of damaged. Quote Link to comment Share on other sites More sharing options...
a2orry Posted January 5, 2016 Share Posted January 5, 2016 Its for pinion adjustment factory set i would say best let a garage have a look .ive adjusted loads of steering boxes in the old days never a rack. Quote Link to comment Share on other sites More sharing options...
a2orry Posted January 5, 2016 Share Posted January 5, 2016 Second thoughts on this the fluid shouldnt get to that part of the rack i would say you have an internal seal passing fluid . Quote Link to comment Share on other sites More sharing options...
350zPhil Posted January 9, 2016 Author Share Posted January 9, 2016 how bad is it that fluid is getting to that plug, should I be thinking about a new rack or is it just I should mark where I think I want the plug done up to and then seal her in Quote Link to comment Share on other sites More sharing options...
a2orry Posted January 9, 2016 Share Posted January 9, 2016 Ther should be no fluid at that plug im afraid only proper fix is a reconditioned rack moving the plug ist actualy a plug changes the rack and pinion adjustment Quote Link to comment Share on other sites More sharing options...
Ricey Posted January 9, 2016 Share Posted January 9, 2016 Zmanalex will be your best bet for something this technical mate Sent from my SM-G900F using Tapatalk Quote Link to comment Share on other sites More sharing options...
a2orry Posted January 11, 2016 Share Posted January 11, 2016 Forgot about zmanalex he will probly have a perfect second hand one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.