-
Posts
538 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Renegade
-
-
My knocking from the rear, turned out to be a front drop link
-
Great guide. I have just done mine it took around 50 minutes.
My window was stuck at the top I put a new motor in instead of brushes.
The only thing I can add is that I also saw this guide too. http://my350z.com/forum/maintenance-and-repair/361241-how-to-repair-stuck-broken-window-motor.html
Taping the window meant no messing around with getting the glass right.
No idea what would happen if the window was down
-
If he is Gas Safe registered report him to them.He has left a gas appliance in a dangerous condition.
Even though it is a water leak.
- 1
-
I ordered the dreaded passenger window motor on Thursday, it arrived Friday at 10am Great service. Thanks.
I just found some sweets in the bag Thanks
- 1
-
The belt probably just wants adjusting,if it is in good condition.
Its is an easy job to do.
-
UV protection I never bother. I only really need to clean the lights once a year. The meguiars paint cleaner is only lightly abrasive if at all.
Then I just wax the headlights while I do the rest of the car. As others have said just go polish them, they soon clean.
-
Meguiars paint cleaner is all I ever use, it soon cleans off. T cut probably works too.
-
It fits fine.
-
-
Thanks Good thinking I will go take one out.
-
Changing the plugs,I dropped and lost 2 of the small bolts that hold the coil packs, wiring loom brackets.
Ones I ordered from ebay, you could probably assemble Sydney Harbour bridge with.
-
Nissan VQ engine used by Renault. http://en.wikipedia.org/wiki/Nissan_VQ_engine
-
Just one of these as mine snapped in the middle. You can get a black one or use tape
http://www.amazon.co.uk/BLOCK-CONNECTOR-STRIP-jointing-cable/dp/B003ZWE7HW
- 1
-
I fixed mine with a small electrical block connector .
-
My car has just been for a service at Mikey's brothers garage.
Ritch spotted a corroded hole in the sump which has just started to leak through.
It might be worth having a quick look at yours.
glad to hear he is still looking after you
Yes he is, and doing a great job as always.
-
My car has just been for a service at Mikey's brothers garage.
Ritch spotted a corroded hole in the sump which has just started to leak through.
It might be worth having a quick look at yours.
- 1
-
These are around £200 new. Most old / second hand ones will be rotten too.
-
-
On passenger side, chrome trim just pops off. There are 2 bolts behind they are quite far in.
I would imagine drivers side is similar. This is for an 04.
-
One of our members cars was on there a few years back, Quick google found it http://www.barryboys.net/phpBB2/viewtopic.php?f=1&t=33235&start=0
-
Ask R35Lee if he has one, http://www.350z-uk.com/user/10571-r35lee/
-
what do nissan charge for oem exhaust components? - eg backbox
Over £400 for backbox, £180 for middle section.
-
That was last year. I did get a set of DBA all round from Alex
-
Hi
In response to your email for front and rear discs 350z
Front £221.99 each + vat
Rear £221.99 each + vat
Many Thanks
______________________
******** **********
Parts Advisor
Harratts Sheffield Nissan
- 1
Opinions on this wheel
in 350Z General
Posted
I bought a rear alloy from ebay so I could get my rear wheel painted as it is getting the usual bubbles.
The advert stated. Alloy is without any buckles. I have already requested a return
What do you guys think is it bent ? I have never seen a 350 rear damaged before.