ben@RARE RIMS

If you got it under £3k it was a total steal...

I was going to say that - got there first! Speedy fingers!

A friend of ours is selling this:

http://www.ebay.co.uk/itm/Nissan-350z-GReddy-TD05H-18g-Twin-Tu-1-800-00-/360919327785?_trksid=p2047675.l4066

Thought it may appeal to some people?

Bargain for somebody!

We do indeed still offer these

D2EX are in stock in 18" 18x9.5 and 18x10 - ET12.

Depends on the wheels, and if they're already ordered, but something like 8-10 weeks.

Is this the neochrome/chameleon rota do as you posted on facebook a while back yet the like of the finish below looks very dark

Yes, it's just lighting levels and them being different wheels that make them seem different.

Can you please add weights to this thread?

 

I would be very interested in something like the t2r or Fighters.... but only if their weight is similar or less than the OEM Rays. (which, I understand is unlikely without spending big monies)

 

Thanks,

18x9.5s are between 9.5kg and 10.5kg each - depending on offset and which wheel it is. They're not going to be quite as light as a forged wheel that is also narrower, but they're not heavy by any means if that helps?

Anything can come in that finish - it's a special order though so there's a bit of a wait.

3 minutes of watching - but the upshot is the V105 looks like a strong contender!

We can do them at decent prices

225/45/18 = £109.68+VAT per tyre.

245/45/18 = £120+VAT per tyre.

If ordered with our wheels we'll do free fitting If you'd like to know about any other sizes let me know and I'll be glad to quote.

D2EX are 18" only currently.

Grids we can order in Chameleon - they just take a while - if you're like some we're happy to order them for you

So, finally it's on to the future!

What would you like that we dont have there? Are there any finishes you would like to see that aren't currently available in the wheel you'd like?

Let us know, we'll see what we can do! Rota will not make single special order sets of wheels - we have to hit minimum order quantities so if you want sky blue pink with yellow polker dotted wheels you're going to be disappointed, but if your idea is not too far out then we may take the balance in to stock, or some other people here might like to get involved - so please give us a bell and we'll see what we can do

Now onwards and upwards - these are our 19" options!

Grid:

9.5 Front:

10.5 Rear:

GTR:

9" Front:

10" Rear:

PWR:

9" Front:

10" Rear:

There are a few other 18s that are slightly different sizes and offsets, but can and do still work:

Force 18x9 Front:

18x10.5 Rear:

D2EX - these are ET12 so may require arch rolling depending on your choice of tyres and ride height / alignment:

MXR - a few options here:

18x9 ET25:

18x10 ET12:

18x11 ET8:

Finally the T2R woul dbe 18x9.5 ET25 all round:

We do get asked from time to time what the options are... So I thought a thread listing them with pictures could be a good plan

Firstly in 18" in 8.5" width if you are not after wider wheels than stock we have:

Fighter:

Grid:

GTR:

RT5:

Torque:

It's quite common to use the above as a front, and team them up with a wider rear as well - here are the 18x9.5 options to match:

Fighter:

Grid:

GTR:

GTR-D (Also matches the 8.5 GTR - same face but with a dish)

RT5:

Torque:

They will fit the wheels, but just double check the rolling radius against what you have to make sure the TC wont get angry with you

235/40/18 91Y Yokohama Advan Sport V103 No Porsche Rated tyres are on clearance at the moment, I thought some people here might like them...

£65+VAT - plenty available at the moment!

Let me know

Ben

We have just listed a load more clearance wheels on ebay - http://stores.ebay.co.uk/Rarerims/Rota-Alloy-Wheels-/_i.html?_fsub=1965356016&_sid=56611406&_trksid=p4634.c0.m322

Grab yourselves a bargain if you're looking for wheels!

So I am learning... I am getting lots of quotes in, but I was hoping for some feedback without a vested interest... unless of course somebody wants to do some dealing with some wheels

Cheers

We're trying to factor in the running costs as well, it's 20mx38m the area being lit, 7.9m apex and 6m at the sides.

Anybody know about warehouse lighting?

LED?

Induction?

Sodium?

Others?

We're looking at moving down the road, and have to re-jig the lighting and get a load more, and not having done this before, dont have much experience in it.

Can anybody give us some pointers of which direction is best these days?

Thanks!

Only just spotted this thread... take a look here:

http://www.350z-uk.com/topic/27580-new-rota-gtrs-18-with-dish/page__st__40#entry911017

YHPM

Brake clearance would be worth checking before you buy them if you can if at all possible?

It'll also be the weather. My 530D is constantly having the traction light flash as me now it's got a bit colder - makes it even more boring

We have these available to us, and are thinking of getting them in. These are the specs:

18x10.5 ET27

18x8.5 ET20

They look like this:

Does anybody fancy any of these? What are your thoughts?

They're Rotary Forged so strong and light

Cheers for your feedback!