Jump to content

paulsx

Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by paulsx

  1. Hi Alex thanks for that was hoping not to change the arm as mine has aftermarket bushes in it. How much are the arms and ball joints please?
  2. HI all need a bit of help, I've been gathering parts to rebuild the front end of my 350z, its a late 2003 so I am assuming its DE. I have been told DE's had 14mm ball joints and HR the 16mm ones. For some odd reason my car has a 14mm one side and a 16mm the other, so I am assuming somethign has been changed at some point in the past. Does anyone know if the uprights and other arms are the same? I.e can I just buy a 16mm ball joint or will I have to change the other arms as well? Cheers Paul
  3. Would you have 4 replacement bolts to go with this? mine are mullered by PO
  4. I am after a used performance exhaust if possible
  5. HI guys after a quiter aftermarket exhaust for my 350z, has anyone got anything on the cheaper end of the scale for sale please?
  6. paulsx

    Quieter exhaust

    Hi guys the 350 I brought is far too loud and I need to quieter down the exhaust. By the look of it has a milltek y pipe, sports cats and a non resonator back box. What can i do to kill some of the noise?
  7. HI guys bit of a random one this but I've just brought a 350z thats been off the road for years. Just before it went off the road it was in with you guys and had nearly 3.5k worth of work done., (giuy gave me the invoice lol) Amongst that was dyno tune UPREV001. Just wondered what this entailed? Many thanks
  8. paulsx

    Brake shields

    Hi thanks for that let me know if they have any please
  9. paulsx

    BC Coilovers

    Hi guys my new project car has got BC coil overs fitted but they are way too low. Does anyone know how to raise them up as they are threaded at the bottom aswell?
  10. paulsx

    Brake shields

    Hi everyone the front brake shields on my Brembo 350z have completely rusted to nothing lol. The only ones i can find are used ones on ebay in the USA, are the brmebo and non brembo shields the same? If not does it take much to modifiy them? Paul
  11. paulsx

    Brembo's

    Hi thanks was looking at those I may give them a ring tomorrow and see what exactly they are
  12. paulsx

    Brembo's

    How much are they please?
  13. paulsx

    Brembo's

    Hi all first go at workng on the zed was a bit of a disaster lol. I knew the front hard pipes were no good but now but aside from just about every bolt snapping the drivers side brembo is scrap 😭 Whats the best option as I assume cant get exchange calipers as this as stripped threads in pipe inlet and bleed nipple holes
  14. HI guys may need to go for pair of new front wings for my early Z. Been looking on evil bay and there is a big difference in price £60-£120 each and I assume quality varies aswell. Has anyone brought any good fitting wings and if so which ones did you go for? Paul
  15. pre facelift its an Dec 03 car. There will be a few bits i need Ill pm you
  16. Hi the doorcard is slightly torn where someone has tried to glue it before by the look of it
  17. Hi all just gathering bits to start my project car, one of the biggest issues is the hard brake pipes have failed in couple of places. Has anyone got a fix without replacing the whole pipe sa they are NLA. Can you flare the original steel pipe to put a fitting in and then make a cooper pipe or are they too hard to flare? I assume i can then replace the rubber pipes with braided or are they too complicated? My car has brembo's on it. Many thanks
  18. HI all just going through my new project car and the only thign wrong with the interior is the pass side door closing handle is broken off the door card. Is this a common issue with early cars and hw easy is it to find a good door card complete with internal pull and trim? Many thanks
  19. Car looks better in pics, a fair bit of rust to sort and a few other issues. Car is also far too low for roads around here so needs raising back up a bit but it will get there
  20. Hi Andy I live in Weston Hills just outside Spalding but work in Peterborough, Car will be here tomorrow so will put some pics up but dont expect much lol
  21. Hi all just gathering parts to sort body work out on 2003 350z i just brought. I need a good pair of non rusty front wings and a drivers side rear quarter if anyone has a scrap shell they will cut, let me cut or buy. Let me know what you have please? Many thanks Paul
  22. Hi all new member here, name is Paul and live just outside Spalding in Lincs. Have had loads of Jap cars over last few years including range of S bodies. Currently drive an Altezza but have just brought a lovely rusty 350Z to do battle with!!!
×
×
  • Create New...