Jump to content

Retro LLama

Members
  • Posts

    23
  • Joined

  • Last visited

Location

  • Location
    West Midlands

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Retro LLama's Achievements

Z Hopeful

Z Hopeful (2/7)

2

Reputation

  1. Hi saw this on facebook wondered if any ones tried to do a similar design with a 350z? seen this cool looking 911 with a wrap livery. May be a nice way to make a car with bad paint eye catching!
  2. great video underside looks in quite good nic. nice testing also :). can i ask what phone holder you use to keep your phone in the lid space? I'm sick of mine been thrown around the cabin! what's planned next mod wise?
  3. Thanks for the recommendations and advice guys bumpers all on and fitted great! The body shop had a few issues with the under tray as the threads under the car were pretty warn due to the age of the car! but all in all the fitment is perfect! can easily see how long an aftermarket one would take to fit in comparison . i also had to disconnect the head light washers to save from drilling and cutting in to the new bumper. has this been an issue for anyone when it comes to Mot? i can easily just swap the bumper over if it is the case. gonna enjoy it for how it is before seeing if any other bits need doing like a OEM rear wing in the future. i don't want to put my old licence plate on as it looks so nice! does any one have any recommendations for plate locations and sizes i could go with. would love a flip out plate but think it might be bit to much work Many thanks
  4. thanks for the info trying to find part no 112966 but struggling to find any besides the clark motorsport ones. thanks for the link but prefer to buy off a site i can pay by PayPal. cheers
  5. Hi been trying to find a part number for the clips that hold the top of the front bumper in the engine bay as pictured below does any one know the part number as i i see a few different potential clips on eBay i have doubts it will be the same clips as the arch guards? many thanks
  6. sweet thanks Andy! ive test fitted the filler plate and engine skid pan and all seem fine apart from the corners of the bumper filler plate should these holes bolt to the bumper in white? or are these for attaching to the inside of the wheel arch? any ideas from any one would be helpful thanks again just trying to avoid any possible issues at a paint shop Cheers
  7. Thanks for the recommendations guys, brought one from Tarmac motor sportz! very happy with it! extremly well packaged! am i right to say an uk Nissan 350z badge will fit in the v3 bumpers badge space? they are the same size just incase the JDM badge is a different thickness ? is it worth buying any extra bumper clips incase the original ones break? also any recommendations for paint and body shops in the Birmingham/West Midlands area would be greatly recommended! Cheers
  8. Cheers guys new stock back box and centre resonator fitted the scorpion y pipe with no issues! Many thanks
  9. Hi key fob has been playing up over the passed few days. started needing multiple inputs before opening and now doesn't open or lock by fob. I've added a new battery and have tried the below. it flashes on number 3 but not 7. any ideas how i can fix this?? it sets the alarm off every time i open the door and have to scramble to start it imagine i cant get this fixed at a Nissan garage any more 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2 seconds, the system will enter programming mode and will flash the warning lights twice. 4. Press and HOLD the unlock button on the Plip. 5. While pressing the unlock button, press the lock button 3 times. 6. Release the unlock button. 7. The warning lights will flash once to indicate successful programming. 8. Repeat procedure 4 to 7 for up to 4 plip key’s. 9. When completed turn ignition ON, and the warning lights will flash 2 times. 10. Remove key, and check all plip key’s for operation. any advise would be much appreciated! thanks
  10. Ace! yeah think i will go OEM for a bit if it gets dull i will save the Scorpion bits and look at getting a stainless back box down the road. i will get on eBay and see what i can find Much appreciate your help!
  11. Updated Baffles have gone in the exhaust so need to get a new back box and centre resonator. do any off you think i will need a new Y pipe to make an original exhaust and centre resonator fit? as the current y pip shown above has a resonator or silencer in it already thanks again
  12. Great that's narrowed down most of the potential issues! its weird it idles quite quietliy but anything over 3000 rpm is mega loud. will see what the exhaust guy says will prob go for a new standard back box or a silencer if its not to broken. thanks again guys
  13. Thanks for the suggestions! took some photos the cats look fine and standard? but the centre section has no resonator. but i don't think the standard 350z centre resonator would fit as it has a flang on the end and the scorpion back box doesn't. May take it to an exhaust shop to see if the baffles have gone. much appreciated!
  14. actually think the Scorpion System has its centre pipe built in to the exhaust! so will prob need a new back box and centre resonator! least its a easy fix any recommendations where to buy them? imagine it will be a ebay job? cheers
  15. are sweet thank you! if so might have a straight pipe instead of the OEM resonator/ silencer as well ! will check tomorrow glad i know what to look for now, much appreciated
×
×
  • Create New...