Marky67

Cheers, so 5/16 recommended? Possible gains? I’ve got a standard air box but I’m hoping to move to a popcharger as they seem to be what you guys on here are going with. Are you guys shopping at a preferred supplier for most of your gear? I was hoping tarmac sports would be kind to me lol

Great lads. On retorquing the plenum bolts, do you get guidance in the spacer kits? And I’d there a kit you recommend?

Hi people, about to remove my plennum to replace with a polished one. No mods at all so far. I'm guessing it'd be the best time to consider a spacer if I'm gonna. Heard from a friend that there's only gains to be had from fitting a spacer on the 06 model and above. Mine being a 55 plate I thought I best consult the experts. Any advice? cheers

Hi guys, just cracked the lug of me engine cover. Looking for a replacement, standard, decent painted, carbon or dipped. I'm open to ideas if anyone got gear. I'd like to get battery cover etc if anything but standard cover. Keep me posted if you see any. Cheers. marky67

I'll check that, cheers jack94

That the replacement for an 55 plate mate? Are they a direct replacement or you gotta do some remodelling?

Alreet lads, just wondering if any of you have replaced the fans ( cooling & AC) with aftermarket ones. Advice appreciated. My fans have gone down one after the other, checked and got voltage at both motors so looking to replace and hopefully not break the bank. I think I've heard moshito mentioned???? thanks for your help..... Again marky

Thanks lads. Keep me posted 1ce

Cheers lads

What’s involved with the uprev lads. Enquirer recently with a mapping garage in the north east and was told they can only get tiny gains on the 05 z

Hi people, no mods at all carried out on my z, totally stock 05. Are there any gains to be had by fitting a plenum spacer to the 05? And if you do does it get in the way over the strut? cheers Marky

Nice job

Hi guys, had my 05 350z overheat while stationery he other day. No visible leaks and off side fan coming in as temp rises and running at high speed. Near side fan running at half speed when I activate ac. I’m thinking thermostat but any advice from the experts would be appreciated. also I’m hoping to brighten up the engine bay when the weather lifts. Anyone in the north give me some tips? Anyone up hear found a place that dip transfer engine covers or polishes plenums? TIA. mark

Thanks again zmanalex

Thanks all... that banana bar sorted my rattle. Good lads on here

Cheers lads, he’s got me sorted with the arm. I’ll be quizzing you more in the future no doubt

Cheers lads. I’ll replace the offside banana arm and see what happens. Any idea where’s cheapest to go for these. Dealers charging about £360, found an ad at £250. Where do you lads shop?

Hi, new member here from Tyne and Wear. Got a 05 350z with a front end rattle over uneven surfaces. Can't find anything loose underneath. Slight play on offside banana bar compared to left side but no noise when I pull on it? I've heard this is common, just want your opinion before I fork out for one. Thanx in advance, Marky.