scotzman

Thank you sly, and everyone else, phoned the tinter this morning and he said bring it back in and he will sort it...car is in for a respray this afternoon and tinter will fix it after that.

Had my evo done previously with more of a bow to the rear window by the same guy and was perfect.

Its a new hood so the window is new, the glass has not been cleaned properly prior to tinting by the looks of it, no heat gun was used in or out the car for the shrinking etc.

Got my windows tinted yesterday, surely this is a bad tint from a repsectable tint specialist in Edinburgh

As above please... Thanks Ross

Hi Peter, was told its possibly the speed sensor on the gearbox, so im gonna PM Jon@emperor and see if he has one... worth a try

Would i have to reconnect the original wires obviously

Only thing connected is the "speed limit fencer" as in pic in post #9

Jet if i remember right when had it facia and cluster out to do the cameras, i always check pin connections before i put anything back and it looked like there was no connections added to the cluster loom, but will remove it today to double check and will post a couple of pics.

Thats what i would have thought

Or just get my speedo fixed

Never noticed them reading differently or otherwise, the speedo could be a MPH sticker i guess but digital was def kph

Digital one reads in KMs and face dial has the mph... if that makes sense.. I deally if im gonna have to buy a second hand cluster obviously i would buy it in MPH as i was gonna buy one anyhow..

Hi Jet..I wouldn know about the speed chip converter unless its a De-limiter which i found hanging in the passenger footwell.. this is the same as what i found. Does your speedo read in kmh or mph? Hi Jet speed on digital reads Klm

Unfortunately i dont have another cluster to try, i could buy another second hand one Aash then would i not be better going for one with MPH

Im guessing its more than a 2 min job in my case with the cameras the cluster is JDM and still in KLM, there is a speedo de-limiter hanging iin the passengers footwell but im guessing its not related I swapped mine from a US one in miles to a Euro one in kms without any issues whatsoever. In any case, pop the ignition trim out (ring around the ignition), remove the lower steering column cowl, undo 4 bolts and a plug, that's it. Pop the other in and just see if the needle moves, you don't care if its miles or km to see that the needle moves I suppose. Hi Aash, do you mean disconnecting the SLD and putting the original harness block back in ie eliminating the sld... or are you meaning another cluster

Hi Jet..I wouldn know about the speed chip converter unless its a De-limiter which i found hanging in the passenger footwell.. this is the same as what i found.

Where abouts does this chip go? Mine has the same problem but ultra-intermittent (normally on hot days/after a long drive). Standard computer fix of "turn the car off and back on" Its not that the car needs a reboot as everytime i get in there is no speedo

Im guessing its more than a 2 min job in my case with the cameras the cluster is JDM and still in KLM, there is a speedo de-limiter hanging iin the passengers footwell but im guessing its not related

Hi Marz, had the dash out a few times to fit reverse/front cameras/double din etc, but speedo had stopped before i did all that, checked all fuses in the footwell yesterday and all seemed ok, maybe i should double check them again as suggested as most people with this problem when they re-seat the fuses they have a bit of luck.

Hi all, speedo on my 350 2005 jdm has stopped working... pulled the fuses from the foot well and behind the battery and all intact,.. speedo shot up a couple of times but now nothing, not even the digital one, indicators i get sound from..... what would be the next check after the fuses... thanks for any help..

Today .. Possibly a Blue 350z coming out of tranent...east lothian... just caught them at the last sec but did wave...I was in the 350 pearl white

Or m6 Flange Bolts, and a washer if needed.

Dont they have Vetical and Horizontal adjusters to compensate the throw of the beam though