Maddog

Looks a really tidy example, GLWS

Thanks Davey

Hello and To the forum.

have a look in the for sale section, at least you know your buying a well looked after Zed from members on here.

http://www.350z-uk.com/forum/51-zeds-for-sale/

Dead Easy !!!!

lovely in Red, GLWS

looks really good buddy,

Silver is very difficult to show the paint quality but omg that is gleaming, nice mods too.

Welcome along to the forum,

i'm just down the road from you in farnborough incase your interested.

http://www.350z-uk.com/topic/111271-2004-350z-gt-spec-one-and-a-half-week-sale/

This is a good installation guide i used, thanks to Hodaka

http://www.350z-uk.c...tle +controller

The connector block i'm referring to is in step 3 (photo), he has used sellotape to hold them together where a cable tie can be used.

Hope this helps

Hi,

My little bits worth,

I have the same controller, when i initially installed the D1 all i got was the same as you reported a few flickers, after a bit of web searching i found out the connector block between the controller and your accelerator can be pushed together 180 deg out,

As soon as i pushed them together and cable tied, all works correctly, Wondered why there was a large cable tie in the box

A bit peculiar, what i thought was the logical way to connect the blocks together, Wasn't, i had to turn one block 180 deg, push together, then Cable Tie.

Now All Good, Works well

As much as i am enjoying my 350Z i need a little bit more luggage space for traveling

While i'm back for Christmas there might be someone looking for a nice 350z while i'm on the lookout for a Skyline 350GT.

Here she is:

I bought the Car in Jan 2016

Two previous owners.With Good History

2004 350Z GT - Spec - Manual - Silver (KYO G)

64000 Miles, Most of the mileage i've done has been motorway to and from Germany running 100+ octane

Discs and pads all round

Diff Oil

Gearbox Oil

Engine oil and Filters

Aux Belts

Bosch Spark Plugs

Stubby Ariel

Horsham Developments Grounding Kit

D1 Spec Throttle Control

Rear Parking Sensors

Pioneer satnav media system

Replaced OEM Satnav Screen Cubby Hole

Nvidia Dual Stainless exhaust system, Purchased from another member on the forum

De-cats supplied as i haven't changed the mapping to the up-rev.

Rear Boot Spoiler

Other than these few changes the car is stock standard.

Battle Scars to the Bumpers.

I received a very kind parking scar to the rear left lower quarter panel which i had an emergency repair done to seal out the winter conditions, needs a final paint matching, otherwise there's no rust that i've seen around the bodywork

Rear tyres needed replacing so i put a couple of new winter tyres on the rear (budget) As i've been working in Europe.

Some more photos to follow.

With new MOT

£5900.00 ONO

Located Farnborough, GU14 Area

After all the advice i reinstalled the OEM cats, until i get all the induction and mapping done,

by the way there is a spade connector very close to the passenger Cat, don't bump this off as i did, your Zed won't start. (nothing, no click, no tick, nothing) lol

Thanks gents for all the emails,

Air vents now sorted

One tick off the list for project front bumper

Hello and to the forum

I have one somewhere, driver's side I think in black fibreglass with a chipped corner. I'll try to find it tomorrow and send you few pics

Thanks

I'm looking for a pair of these vents if anyone has some lying around,

i would like them to be in fiberglass, not necessarily in Carbon and if they are damaged that's ok.

 

 

Sent from my SM-G900F using Tapatalk

I'm looking for a pair of these vents if anyone has some lying around,

i would like them to be in fiberglass, not necessarily in Carbon and if they are damaged that's ok.

Anyone on here, private plate **LEU

Sent from my SM-G900F using Tapatalk

very interested, PM Sent

As I work in motorsport I received this job application, not my field of expertise but an opportunity for someone

Engine Engineer

Australia

Nissan Motorsport is the Official Factory Team of Nissan Australia in the V8 Supercars Championship and is currently looking for an Engine Engineer to join the team based in Melbourne, Australia.  

 

The Engine Engineers role will be responsible for:

Implementation and evaluation of engine tuning and mapping philosophies to be used on race engines Work with Purchasing to order parts for engine servicing/re-build Travel to all Race Meetings and Test days leading engine tuning. Interact with drivers and engineers to tune engine according to their programs Liaise with Engineering department regarding plans for race track engine programs including fuel economy & development items Contribute to Engineering Meetings with regards to engine performance and development items and philosophies. Lead problem solving for engine dyno issues Developing a thorough understanding of the engine build procedure Complete nightly race track engine service as required Compile Engine Issues list from each event and lead issue resolution.  Supply and coordinate test data to engineers for engine simulation Lead R&D projects, involving:                 Coordination of R&D testing programs                  Maintaining R&D project folder                  Ordering and control of components related to R&D projects Supply and coordinate of test data to engineers for engine simulation Update and manage Engine Logs for V8 Supercars Liaise with V8 Supercars regarding rule changes, engine inspections etc. Updating of engine component drawings and liaison with Production Manager regarding the manufacture of engine components........

 

Sent from my SM-G900F using Tapatalk

Think i'll be putting the Cats back on again, but it's so smooth with the de-cats,

I really didn't want to spend a fortune on the car as this is my first Zed, and I'm contemplating selling and buying an automatic.

I agree with what Irn Bru is saying and i think i'll hold off the up-rev until i get the Zed i'm completely happy with and then customize accordingly.

Thanks for the input guys

If you don't want to splash for upRev, get a cheap code reader to make it easy to check the code and clear as needed.

Which is the better code reader to get

Sent from my SM-G900F using Tapatalk

2004 DE Standard apart from,

Invidia True Dual System, With Silenced DE-Cats,

The engine light came on so i got some Lambda Spacers, it's seems to be ok pottering around until i start driving her the way she should be driven.

Then the light comes on again until the dance be done, Not going into limp mode just the light is on. (i presume the second Lambda sensor)

Do i need a re-map or maybe an induction kit

The engine is standard and didn't really want to go down the up-rev route

Any tips or tricks to avoid the engine light coming on

Welcome aboard, nice looking Zed you got there

nice looking car you got there bud

GLWS Adam

I'll Take one

Will PM Steve

Hi, Welcome to the forum