Luke350
-
Posts
157 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Luke350
-
-
As title says really. Got an issue with my clutch. Had varied answers on here that all kinda make sense. But either way, I'll take to take it to a garage to fix it. Does anybody know anyone in my area who knows their stuff on zeds?
Sent from my iPhone using Tapatalk
-
Who's the closest person to me to take the car to have a look at it? Doesn't feel like my cluch is slipping. Done it a couple more times now. Pedal goes really light at the top and really heavy at the bottom and that's where the biting point shifts to. I've had it in 5th and 6th at low revs and planted my foot and there's no slip at all.
Sent from my iPhone using Tapatalk
-
I'm having a huge service done soon including all fluids so I may see how it runs after that and take it from there. Thanks for the responses.
Sent from my iPhone using Tapatalk
-
Only done a few hundred miles in my HR. And I'm adoring it. But I notice when I bought it the biting point was very high, but didn't seem to slip. I give it a blast through first the other day, and as I put it in 2nd the clutch slipped a lot. Since then, the biting point has gone much lower down but seems strong again. Do they have self adjusting clutches? And it's just worked its way too high causing it to slip? Or am I looking at new clutch? Cheers.
Sent from my iPhone using Tapatalk
-
Awesome chirag. Well I know my plan now. Merry Xmas to me! Ha
Sent from my iPhone using Tapatalk
-
I'm wanting full system then uprev. What's the need for plenum spacers? And is this something I should do before uprevving?
Sent from my iPhone using Tapatalk
-
Ah. Not interested then! K&n panels will do me. I've got a HR so I wanna keep the strong and cool air flow. Has a nice induction noise anyway. Which hfc's? I've heard Berks fail emissions tests sometimes?
Sent from my iPhone using Tapatalk
-
I think this is the route I'm going to go down. With k&n panel filters. Does the full milltek system include y pipe? And I'm still baffled as to what a pop charger is and what it does! Then it'll be in to TDI north for uprev.
Sent from my iPhone using Tapatalk
-
Very interesting! I'd sacrifice top end speed for acceleration any day. Even if not a track car. I've no plans on going anywhere near the top end of the cars capability.
Sent from my iPhone using Tapatalk
- 1
-
30 years young. Although I think insurance think I'm 20 by the price!
Sent from my iPhone using Tapatalk
-
Can't really tell properly what's going on in the vid. Obviously different shift times, but is the 4.08 accelerating quicker?
Sent from my iPhone using Tapatalk
-
We sell a lot of the Millteks,
Drop me a pm if I can help, lifetime warranty for a new one. They are a good system
Have a look here
http://www.350z-uk.com/topic/101182-tarmac-sportz-350z-de-milltek-power-package-900/page__hl__power
Chris
That says DE package mate. It's for a HR.
Sent from my iPhone using Tapatalk
-
Ok Kieran. Does it include the hi flow cats? How many miles has it done?
Sent from my iPhone using Tapatalk
-
Do people know rough price on these mods to an 07 HR
K&n panel filters
High flow cats
Miltek exhaust and Y pipe
Uprev at TDI north
Price for each part and best place to order. Looking for quiet exhausts as they seem loud enough standard. And miltek seems to be the way to go for that but also good quality.
Cheers
Sent from my iPhone using Tapatalk
-
Still gains on an n/a engine. And the HR seems to be Betty responsive and smooth already so it's good you've got it back that way with possibly a 20 bhp increase, as I bet the rr would have read lower than 309 originally.
Sent from my iPhone using Tapatalk
-
"Make sue all wording is correct" the irony!
Sent from my iPhone using Tapatalk
- 2
-
Very curious to see how this goes. Keep us posted. I'm going triple checking my oil now!
Sent from my iPhone using Tapatalk
-
Or at least mess with ratios so 2nd gear is hitting a much more uniformed 60mph
As mentioned above, swap out you diff to change gearing. Try the lower ratio auto diff, will be cheap (if doable).
Sounds like the best option to get full power at more reasonable speeds. Thanks
Sent from my iPhone using Tapatalk
-
Ye it seems to specifically be a HR problem. Quite hard to explain. Especially when the engine pulls and sounds amazing at any speed in any gear. But one of the reasons a payed a premium for a HR engine is to have the extra power. Which it definitely has IF you drive it right. Maybe it'll just take to to master it. I was just hoping there was an easy fix where a guy could plug his laptop in, click a few buttons and bring the power down to a more useable level. Or at least mess with ratios so 2nd gear is hitting a much more uniformed 60mph.
Sent from my iPhone using Tapatalk
-
Ha. I have 3 diesels already 😂 yes true the torque can make things feel faster especially when it comes in a big lump. I'll get used to it I supposed. I had a Celica Tsport that had lift (like vtech) and that need to be spanked to come alive. But at least that only did 35 in 1st and 60 in 2nd!
Sent from my iPhone using Tapatalk
- 1
-
I don't want a super quick car either. I've had one. I want the HRs speed at 5,500-7,500 but at a more accessible Rev range. Just to save downshifting into crazy low gears just to stop being humiliated by slower cars.
Sent from my iPhone using Tapatalk
-
I don't want more power roscoe. I want the HRs power, but at a more accessible Rev range.
Sent from my iPhone using Tapatalk
-
Over geared is definitely the way to describe it. If you're sat at 35, and needed to be on full chat you would have to do a big blip of the throttle as you downshifted to 1st! Because 2nd would leave you with around 20mph to pull through before on full chat. Not practical at all.
Sent from my iPhone using Tapatalk
-
Hi all. I'm quite happy with standard exhaust on my HR and standard induction too. The one thing I think lets the HR Down is only having that extra horsepower so far up the Rev range. Would a uprev on a standard HR be able to bring the power further down the Rev range? So I'm not having to be in the 60s to get the most out of 2nd gear?
Sent from my iPhone using Tapatalk
Local 350z specialist recommendations in Wigan (NW)
in 350Z General
Posted
Isn't tdi north a Honda specialist? Ye I don't mind travelling a little if I get sound advice. I've seen horror stories with clutch problems where even main dealers throw parts at them unsuccessfully.
Sent from my iPhone using Tapatalk