cascade88

Tsuri511 100% bought a kit from you, I can vouch for this.

Service seems pretty poor but if it's lost I guess there's not much more to it.

One thing I would say, is if plenty of others have bought this kit from you, and you sent out via email the fitting guide, then surely these other buyers will have this guide and can pass it on / make a copy / forward you another copy etc etc?

Now sold.

Fancy it but been told re lacquering can be costly.?

£120 was what I would have paid for strip back and lacquer but can vary. I was happy with it as is on my drifter

First come first served basis, had lots of interest on messages also all replied to now.

Absolutely no chance of a courier? Otherwise id have that!

No, collection only.

Had this on my drift 350z for a while now, great looking.

Structurally it's sound, no cracks or deformations etc.

Lacquer requires attention as it has swirls / scratches, needs rubbing back and re-lacquering to make good.

The carbon weave is undamaged throughout, when wet the bonnet looks fantastic.

There is a slight chip in the clear coat that I has pictured, again this does not go to the carbon weave and can be built back up.

Fitment on my UK zed was great, lines to the wings was near perfect, bonnet shut line also good.

Pictures don't fully show the marks etc, although tried to show best I can.

Collection in person only, located near Manchester.

Price is £250, no messers please.

Sold

Sold

I have a Seibon carbon bulge bonnet I may be advertising soon.

It's structurally sound but the lacquer has seen better days so would need stripping back and re-coating to be 100%, let me know if you're interested and I'll send more info etc.

All PM's replied.

Provisionally sold pending collection this weekend, will update.

As title. Been sat in my dry container for best part of this year awaiting fitment but haven't got round to it, now having a change of plan so won't be used.

It's great quality, genuine new chargespeed item from amazon.

Also have the correct jdm number plate light / boot release holder to go with it, much nicer than having to bond and mess about like with the replicas.

Located near Wigan, Manchester.

Collection only at this time, I don't have the original box tas it was huge therefore no packaging, and wouldn't want it to get damaged.

Rrp is nearly £600, think it's down to around £450 on amazon now, that's for a new, genuine, proper item exact same as I'm selling.

Price £375 including the light / boot release holder.

No offers, I'll keep it otherwise.

As title, for brembo calipers, full set front and rears.

New and unused, don't have the outer packaging, have kept the cap seals on never removed, never had chance to fit them to my 350z so now up for grabs.

They're the clear sleeving type so can see the stainless braiding. Come with all the fittings as shown.

Was £120, asking £100 inc mainland UK postage

I have one and it's a massive difference when feeling the plenum around the tb - now cool whereas before was too hot to hold.

It's correct we ain't the hottest country around, but it's more of the effect the hot coolant has rather than outside temps.

20/25 has never seen anywhere near flush unless you are running positive camber

25/30 still has room but best to roll rear arches.

Won't have been me but my daily commute is past the lake on way to motorway.

I got a good condition DE in black also, near Manchester.

Possibly but was deffo Sunday.

Not sure if it had a wing, only saw back end as I was running. Definitely had a wider rear end / track so wasn't standard.

Not seen any others up this way in about a year yet. 4x4 country.

Around 6pm I think it was near the summit pub heading towards tod. I was on foot.

Any condition any colour any style considered.

Preferably cheap cheap

Any condition any colour considered.

Located near Manchester can collect over reasonable distance price depending.

Got one that the flange to backbox has rusted off, other than that is all good.

£7.50 each new delivered on eBay.

Yeah louder, more snap crackle pop.

There's a guy on YouTube that did the same thing, he put a vid of it standard isr then with the centre box deleted. Think I just searched for isr or isis exhaust 350z, his videos are dark and rubbish but it's for the sound.

I've chopped out centre silencer now. Sounds 50x better. 3.5k revs it sings.

My isr exhaust fit fine, only issue I had was catching on the underbrace. That's fit to an eBay special Y pipe and it's all good no problems, Chris also supplied mez

Fit a stillen Y pipe and berk hfc to my mates car and had a little issue with clearance on pass side as you mention by the sounds of it, slackening everything off and adjusting before tightening down have it enough room, close but no rubbing. Usual exhaust fitment issues / fitting procedure tbh.

Updated with what's left