cascade88

^^ glad, as I've just recived despatch confirmation for delivery on Monday so thought if you guys hadn't got them by now there must be something wrong.

Just ordered a set, surprised there was any left.

Thank you

My mate has the rota grid drifts in that width but 19s, offset 20 will be sound with no issues.

http://www.ebay.co.uk/itm/Rota-GTR-D-18-Alloys-350Z-Skyline-200sx-RX7-Supra-Evo-5x114-S14-Nissan-S15-12J-/331712308890?fits=Model%3A350+Z+Roadster&hash=item4d3b98269a:g:p4sAAOSweuxWTf4A

Ur a BAD influence. They are lush. Shame they wouldn't just bolt on.

What size am I actually looking for to fit? I want aggressive. But also not wanting to worry about fit.

I could arrange arch roll is needed but ideally not wanting to.

Go on rimtuck there's lots of examples there for fitment styles.

I will say if you're wanting even semi aggressive / flush / poke you'll need the arches rolled unless you're rocking standard suspension or height, but then that would be smelly.

Jet I'm running them myself, as was doigie350 on here and nicad in the past as well as others, (nicad had an offset of effectively -5 with his 25mm spacers).

MWTech also had them fitted and wasn't that low / run much camber.

Also - 'sticking out an inch further' than your 11j ones isn't accurate, it's half an inch on the inside and half on the outside (based on same offset).

If you still think there's no chance PM me.

Depends on tyre size and ride height - but the gtr-d 12j et20 will go straight on, 275 wide tyre as has been done before just needs a roll flat and slight camber for flush.

If you want deep you'll need 12j rears on the gtr-d, the 10j option is just a lip really.

Sold and gone to a good home.

They have lots of reductions across everything inc cleaning gear, but the socket sets have caught my eye.

Pictures of rears and another side shot below:

As title, anything considered, I'm near Manchester for collection / delivery.

I have one sat in the container at work, backbox that is, removed from an early 07 in good order.

Near manchester

As title, as cheap as poss as long as it's solid.

I'm near Manchester for collection or postage.

Full set of my 18" 350z Rays wheels with tyres.

The tyres are Bridgestone re050 225/45/18 fronts with around 3.5mm of tread remaining, and Mazzini Eco 245/45/18 rears one of which has 2.5-3mm the other has 3-3.5mm of tread remaining. All tyres are good and true holding air etc.

The wheels were refurbished last year in the gunmetal / anthracite colour.

They are all straight and run true.

They are in great condition but do have some marks since the refurb, I have tried to show detailed pictures regarding the condition.

I cleaned the fronts up fully, faces and behind and they look stunning.

They can be located at either WN2 or OL15 postcodes for collection, or I can arrange a courier.

My price is £420 posted to mainland UK.

Any questions or for more specific pictures etc just drop me a PM.

As per my original post, 60k mileage from my 55 plate UK gt, I'm near Manchester.

Don't mind wrapping them.

If you wanted the rears too I wouldn't want much more for them.

Bought ksport coilovers from Tarmac is reason for removal, can get pictures if required.

I'll do fronts at that price if you come stuck.

I have full set of suspension from my 2006 UK gt 60k miles

Near Manchester

I'll have a set that will be coming off early next week. They're in gunmetal in good condition few marks but all straight etc etc

With tyres, rears are very close to wear markers fronts last time I checked looked to be around 3mm.

I can remove tyres no problem but would prefer to sell as is.

They're located near Manchester, willing to post for right price.

I'll have a set that will be coming off early next week. They're in gunmetal in good condition few marks but all straight etc etc

With tyres, rears are very close to wear markers fronts last time I checked looked to be around 3mm.

Was looking for more than your sought price but willing to negotiate.

They're located near Manchester, willing to post for right price.

You'll get them sold I wouldn't worry about being stuck with them. Failing selling on forum there's lots of other buyers on eBay that would likely pay more.

I have a set on mine.

All sounds awesome, new colour is ace, black is the best.

My friend had a siezed toe bolt that snapped on us, ended up temporarily using a standard bolt and nut and just centring it best as we could had no issues.

I was going to get the DW front arms so that knocking isn't good at all, can you pm me with more details on it?

Have you done the washer on steering arms trick and cut the stops for more lock?

Double post

I don't see anything in the slightest wrong, legally or morally, with naming and shaming the said trader(s) that complained.

Without doing so there's absolutely nothing to stop it happening again in future.

Utterly idiotic greediness.

I'm interested but would like to know if you're going to wait for 20 people or go ahead at 10?

Needs update with pictures