SherlockH

Think I'm going to DIY them like hodaka did

http://www.350z-uk.com/topic/104706-gm-2004-build-thread/page__st__40#entry1607799

Yes I'm interested

I've got a standard back box and exhaust from the cats-back

Located in Portsmouth/Chichester

Well I messaged the seller on eBay and apparently the bulbs won't fit ������ So looking for an alternative or maybe just won't modify the lights and have them standard

Go to the link i sent you, these guys do pretty much what you're looking for.

Thx I'll give them a message and post what I find

Yeah interested, should be able to attend

Well I messaged the seller on eBay and apparently the bulbs won't fit 😡 So looking for an alternative or maybe just won't modify the lights and have them standard

Yeah I'm interested in this, would prefer if it was with 9k RPM and 180mph clock faces

So my ballast has gone in my drivers side headlight (which also has condensation in) and i have slight overspray on my passenger headlight. SO... Ive had my eye on these headlights on eBay, ive seen one or 2 forum members running them and think they look really good, Difference is id like to take it a step further.

The Link for the listing is http://www.ebay.co.u...=STRK:MEBIDX:IT

Basically on there i can chose, things such as Dual projectors, Demon Eye and coloured Halos blah blah blah, Only problem is i dont know how reliable there equipment will be, and id like the option to be able to change what colour demon eye id like. Im a PITA i know.

So another company called XKGLOW got some pretty decent looking products and ive head great reviews. They sell these headlight bulbs:

Heres link for headlights: https://www.xkglow.c..._p/xk042004.htm

I was wondering if doing something like this would be compatiable ?

someone more knowledgable will come along and correct me, but i think there for in car height/level adjustment so not needed on aftermarket headlights

http://www.350z-uk.com/topic/114005-headlights/page__hl__headlights

i think best bet is to get a 6 pin or 8 pin connector (male or female depending) and rewire for which ever way you want to set up. see link above with which wire is for which pin

I'm still good to attend but my +1 has dropped out

Having an aftermarket bumper fitted at the minute, and don't want to melt it. So looks like I'll just have to try get this sent over from the states

Does anyone know where you can get an exhaust heat shield for the tip as my Tomei Ti melts my bumper, was thinking something like this ?

http://www.showstoppersusa.com/nrg-innovations/carbon8-carbon-fiber-exhaust-shield/carbes04/i-287012.aspx

Thanks dean, that looks awesome, sits a little high at the front maybe ? Compared to the side skirts

Have you got a side shot of it dean ? It's looking good from what I can see

I'd park in the spot regardless, or travel the 40 minute round trip in work time, my work pay my travel expenses and time to travel so, I'd be looking at getting some sort of compensation, and be raising a grievance at work about it personally. I wouldn't take this lightly, I know it's only a parking space but it's the principle of letting people (management) get one over on you. If you kick up enough fuss you may end up getting your way.

£300 per month roughly £15 per day on a 60 mile round commute

Seen this morning about 08:00 I was a few cars behind,

Reg **60 XFX maybe ?

Wow £1650, tad expensive for a front bumper seen a similar one i was thinking of buying off ebay, i dont mind doing the work to get the fitment 100%, thats why i was putting a feeler out to see if anyone wanted rid of theres and i could pick up a bargain. was just wondering if anyone had any experience with this one http://www.ebay.co.uk/itm/162247742773?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

After a v3 front bumper, replica or real i dont mind as long as fitting is good. painted kuro black would be even better

long shot i know

1. Zippypooz - N44SSN (PAYCO too)

2. Stuggerz - S7UG V (Plus Mrs)

3. Panman - P44AAN (Plus josh)

4. Chippychip123 - UK04 ZED

5. Dunks - PHZ 4136

6. Paul_B FG05GJK

7. Darkside - DK 51DEZ (plus son)

8. Punisher - DG07 XKA (plus Jelena)

9. Nismoandy - WP06 FNX

10. Rs2oo - X5 HPL (plus 1)

11. xxx180 - WNZ 3507

12. Amyzed FA51 AMY

13. Rich260 OG04LEX

14. JackJ1312 JA57 JCK + Lauren

15. Olly350z - KD53 DGZ plus 1

16. Stephanie -MB04 ETT (+1)

17. SherlockH - SM05 VTZ (+1)

Nismo v1 side skirt wanted in great/perfect condition any colour, black would be even better.

Thanks for digging that out Ian much appreciated, sounds like a lot of work

Would be greatful if you could pull that list out Ian, is that 25k in just parts or labour as well ?

Read your build thread on it, its hard to find information that's accurate and shows mounting positions etc found the full wiring diagram for the 2JZ harness so would be able to do that myself.

I noticed Slide Motorsport put a 1JZ in a 350 but couldn't find any information or proper build thread on it.

I'm just doing research on it at the moment, so I can get a rough idea on price, and what I can and can't do myself. So any extra info would be great

Welcome

These still for sale Ian ? What did you do regarding moving your gearbox back ? Did you just use existing gearbox mount or fab up a new one ?

I thought needed for the 2JZ to work you needed:

-2JZ VVTI Engine for DBW

-Gearbox Adaptor Plate

-Custom Flywheel & Clutch

-Custom Engine Mounts

-Modified Subframe

-Custom Driveshaft

-Syvecs S6GP ECU

-Modify Gearbox Mounts

-Modify Gearbox Shifter Position

Anything else I miss ?