Jump to content

Oggieteepo

Members
  • Posts

    247
  • Joined

  • Last visited

Posts posted by Oggieteepo

  1. Set of 4 Touring Alloys.

     

    They're in ok nick, what appears to be curbing is really just lacquer coming off, so could do with a rub down and a spray, some Hi-Fill primer should be enough.

     

    The Rubber, P-Zero's on the rear but they're dead and on the limit marker on the inner edge i think, only <1mm left of legal elsewhere before they hit the markers too at a guess.. The front are budget ditchfinders, prob got 2.5mm left but again they're budget tyres so that counts for very little on a car like this.

     

    No Cracks or dents so fine for winters, or track/Drift.

     

    Asking for £75 collected, less than £20 a corner!

     

    (I got a bit lazy and forgetful with the photo's, hence the feet, so missed the username labelling off a few - sorry, hope this is still ok mods)

     

    Edit: for thoes of you on mobiles etc.. They're Located near Chichester.

     

     

    IMG_20170219_104244.jpg

    IMG_20170219_104249.jpg

    IMG_20170219_104256.jpg

    IMG_20170219_104304.jpg

    IMG_20170219_104315.jpg

    IMG_20170219_104337.jpg

    IMG_20170219_104408.jpg

    IMG_20170219_104423.jpg

  2. Easy, just put a switch in the line.

     

    Ekona, I have been looking at doing this after my MOT have you done this? Got any suggestions as to where is best to tap into?

     

    Anywhere in the cabin, Or just go straight to the source, near the pumps and put in a decent covered water proof switch/another fuse. Am I right in remembering that The fuse for washers is in the battery compartment fuse box?

  3. You're not helping Jon! Lol. I don't blame you for getting rid.

     

    I have faith, although somewhat surprised how many seem to get broken.

     

    Hopefully something will come up soon! I got a few bits to setup and test then a few more bits to buy before I need to refit the screen.

  4. Weird one,

     

    Looking for a screen unit for a pre facelift (if that makes any difference at all) preferably broken as I'm really only after the casing for a project.

     

    Will pay for delivery of course to UK mainland and hand over a little dollar to say thanks.

     

    Thanks!

     

     

  5. I can't say I have had this problem but seen it before on the USA forums..

     

    If your sure it's the Amp, Maybe put a wanted up maybe someone has one laying around who might get rid for a good price? (apologies if you have ready done that).

  6. CMS sorted me out with the DE Extreme Clutch and SMF, the revs feel more responsive now and I hardly notice the "chatter".

     

    There are already a few threads about it and if you take a look at their trader page they have a thread for it already which many have already commented on.

×
×
  • Create New...