Djb92

Evening everyone, My zed is now at the point where a new clutch is going to be needed very soon. (83000 on the Oem one) I was hoping for some advise as I have no idea which to go for. It's my daily, so it does sit traffic. It's currently sat at 297bhp and I'm not looking at making any faster ( maybe ). So what's the best option and who do I get it from. Many thanks Sent from my SM-G935F using Tapatalk

Again I'd just like to say thank you to everyone on behalf of the family, your help and sympathy has been massively appreciated.

Yeah mate that would be fantastic if you could. Appreciate it.

Thank you all for your kind words I will pass them on to his family. If you can ask around anyone you know who is in the market for a zed it would be much appreciated.

Hi, It is with sadness that I have been asked to advertise James Collins (cov350z) Red (wrapped) 53 plate 350Z. Unfortunately James passed away on Saturday, and his brother has asked me to advertise it on here as he would like it to go to someone who is passionate about Zeds. James has done a lot of modifications to the car himself, the list of mods is as follows: - Nismo style quick release steering wheel. - 30mm lowering springs. - custom android tablet install. - Omp seats - Sparco gear knob, foot pedals and handbrake lever - EBC yellow stuff brake pads and vented discs - Japspeed tie rods - Esprit gtr spoiler ​- A lot of red and black carbon fibre wrap The car has just passed a fresh M.O.T last week, and all mods were completed by the owner. It currently sits at 102300 miles. The owners are looking for a quick sale due to funeral expenses. It is being priced at £4000 ONO. The car is mechanically solid and wants for nothing, if you have any questions please don't hesitate to ask, 07599441867- Sam Collins. Pictures below. Thank you for taking the time to look. R.I.P James Collins (cov350z)

Pm'd

I know that they weren't seized as I freed them both off before taking them there after a different place refused to touch them incase they sheared off the bolt. so I know they were definitely able to adjust them.

That's what my dad was saying thanks for the info though I'll go ahead and take it back. Sent from my HTC One M9 using Tapatalk

Yeah thats after alignment mate. Thats what i thought. My dad seems to think that it looks odd. But like I say I'm bait clueless with this type of thing.

Hi all, as the above says I'm rather clueless as regards wheel aliment and Ihave no idea if this is correct for an oem car. Can someone explain why my camber seems to be so far out on the left side on both the front and rear and yet on the right it is set straight down the middle? Many thanks

Cheers mate ill get on eBay and have a look round.

Autobody worx in coventry did a very good job fitting and painting my V1 lip.

I used a friends lathe and the dimensions that veeg33 kindly left in his build thread.

Your an absolute diamond they turned up today and came with no instructions. And I couldn't find any. Thank you 😄 Sent from my HTC One M9 using Tapatalk

I have those (in the ebay link) and they are too quality for an ebay purchase, and point forward which was what I wanted from DRLs, can't understand why you'd want side facing as no-one would see them unless you were waiting to pull out of a junction the ones i have bought from eBay are front facing in design was just wondering if anyone else had fitted them.

I've bought them now, so hopefully I'll find out Saturday cheers for the info though are they on your build thread? Sent from my HTC One M9 using Tapatalk

Tell me about it, a cheap reverse camera set on fire in my friends hand when I was test fitting put me off of eBay for a while Sent from my HTC One M9 using Tapatalk

They do look nice maybe I'll have to do a bit of hunting around can you let me know how you get on with them? Sent from my HTC One M9 using Tapatalk

I'm not massively worried about the appearance on the car, I had noticed the difference on the facelift models but it only looked minor. I was more worried about the quality of the product, last time I bought some eBay electrics it ended in abit of a mess. Sent from my HTC One M9 using Tapatalk

Has anybody had any experience with these found them on eBay for £110. They say they are for an 03-05 zed? Was wondering if they are worth purchasing? Thanks.

Yeah mate would appreciate that, I've just had the bumper done and don't fancy putting holes in it. The alloys look great really suit the z. Sent from my HTC One M9 using Tapatalk

Cheers mate Sent from my HTC One M9 using Tapatalk

the car looks amazing mate , quick question where did you get that front plate from and what size is it?

Really looking good mate

I think if was around 3/4 hour. No not really mate I moved the cat back from the usual position to after the end of the y pipe. Sent from my HTC One M9 using Tapatalk