zubairhussain123

Also found a pretty nifty Android mod for the in-dash Nexus! Has some subtle but very useful features that really help in the car! The biggest upside is that you can flick a virtual switch which lets you charge the tablet at 1400ma rather than the normal 500ma that a standard USB can handle. This fixes a massively annoying issue where everytime i use the satnav in the car, the tablet dies faster than it charges! I've only added this mod today, so time will tell whether it actually works or just burns my car out! I finally managed to get Torque working over Wifi OBD2 as well, just hunting for a nice non-chav theme for it Tablet screen shots:

Thought I'd quickly show my face back on this thread! So, for all those forum people that say the lightweight flywheel rattles, but you can get used to it - are wrong! The flywheel rattle is very loud, and doesn't fade over time, sounds pretty @*!# when going slow in traffic or idling. However, the difference to acceleration speed is immense and I personally would always get the lightened flywheel over dual mass now that I've been running it for a few months!

Nice!! Sounds like exactly the kind of thing I'm after! Bit rumbly for me at low revs, but I love the high rev pop on let down

Cheers mate. Well worth the sounds! Stock speakers were so crap

Gimme a few weeks to get some parts

So, my clutch went. MOT failed due to a broken exhaust, and I needed a P3 service (just because I wanted the first service in my ownership of the car to be a P3). After a few posts on the forum, I decided to with Clark Motorsport with a Stage 2 Competition Clutch and ultra-light flywheel that he had on offer. And then I found my godsend, Sly @ Kaizer, who did a frikkin good job doing the clutch, flywheel, exhaust repair, MOT, and P3 service! Here's the post I made of the work: Just got the work done from Sly. This guy really knows his stuff!! He had no issue with me standing by, asking all the questions that came to mind and he'd answer them more than happily! The amount of awards he has from Nissan really does speak for itself. photos:

Progress pics: Installed and tested!! The bass is very tight and clean and does drop low; there's zero rattle that I can hear when it drops hard (and that's without using any Dynamat). This box is 100% better than installing an aftermarket sub in the OEM bose location - no doubt whatsoever. I messed up the box a bit, as it sticks out by just under an inch on the left hand side of the above photo. But not enough for me to care. I'm not great at woodworking, but has done the job well for me. I now have my bootspace back, and my amps are all hidden and neatly installed! I put my spare tyre back in, as that holds the boot floor up very well - easier than building a new floor for now. Job done.

The rain has held me out for a few days, so I couldn't carry on with the build. Still haven't received the carpet, so couldn't finish the box, but I've done the amp rack and fitted it behind the seat! Although, in all my playing around, I've managed to generate a power leak in the car, it's killed off a brand new battery overnight. So need to find the leak now! Fun times I also had to hot glue the edges of the box, as the sawdust mix left some small gaps. It looked airtight, but I thought I may aswel be doubly sure, wouldn't want to rip the carpet off if i find a leak later on. Progress pics: Finally got my bootspace back!!!

Box done!!! Can't start a new day without cleaning up the mess, and arranging my tools Finally found my beloved G-clamp, made life a lot easier today! Sub fit perfectly! Was pretty pleased at this point Went a bit crazy with the glue and sawdust/glue mix - but I'd rather do this properly once, did not want an air leak! Will clean up with the dremel and a sanding block tomorrow! As I said, went a bit crazy with the glue and sawdust mix.

Given that the aftermarket sub in the OEM bose location sounded rubbish, I started building an under-strut box (all credit goes to Patch for his attempt at this first!) Got the templating done, and the box sized up and built. Just need to unscrew it all, add glue, then screw back and completely seal up. The box at the moment is held on with minimal screws so I could keep test fitting to the car. Fits very snugly! I don't plan on carpeting it, gonna try matte black spraypaint first, and if it really looks crap then I'll carpet it. Templating: Template done. Bought a coupla workbenches from Maplin for £10 each! Definitely needed these! Most parts for the box fit on one 18 x 606 x 1220mm MDF board (Wickes). Two of these boards or equivalent will be needed for a full box. I bought 4 because I overestimated the amount I'd need, but also because I wanted to make a new MDF floor for the boot. I trashed my existing boot floor when installing the amps. So tomorrow I'll test fit this again to the car, just to see if I need to shave any edges off. Then I'll cut the hole for the sub, and finalise the entire box! Quite pleased with the nearly finished result though. Hopefully tomorrow I'll be able to update with how much better this sounds compared to using the OEM bose subwoofer location.

I've had a few scattered build threads across the forum for a few weeks/months now. Thought I'd consolidate them into one big build thread which I'll keep updated! This is mainly for myself, coz I like to go back every now again and admire my car lol, but given that I'm quite DIY with the things I do, could be pretty nice for other people to see too Enjoy! ------------------------------------------------------------------------------------------------------------------------------------------------------ So, I've always been a DIY audio installer for all my cars, and sift through hundreds of forums to help me do it - thought I'd finally give back to the community!! Here is my Nexus 7 and aftermarket sub install (in the OEM Bose location). First and foremost, took all the Bose crap out, changed the headunit and replaced all door speakers (sorry I don't have any photos of the dismantle, but it's pretty straight forward and you'll find hundreds of forum threads detailing the procedure with very good photos. I never use OEM wiring, generally because they're not made for solid power, but also because I just like to know I've got my own stuff in the car. It's the way I make the car mine. I used JBL components for the doors, replaced the factory tweeters too. The tweeters take some persuading, and feel like they're gonna pop out of the OEM tweeter mould, but its finee, strapped em down with a small metal plate, and all is well. The JBLs were £40 from eBay, and do their job well. I use my components just for vocals, as once the sub goes in, there's no point having much low end bass coming from the components. I just use them to fill the gap between 60-80Hz or so. Next came the dash removal, this one gets a bit more tricky: 1. Put your fingers under the rear silver ring on the gearlever casing thingy, pull it up. Will pop pretty easily. 2. This will just lift and twist around (together with the AC controls), and just move it 90degrees to get it out the way. Note, there is a white ribbon cable connected to the back of the controls, this deals with the AC controls AND your speedo/petrol/temp gauges behind the steering wheel. 3. You'll see a plastic white box from which that white ribbon cable came from, this box is held on by two screws at the back. Pretty easy to find 4. Now you'll see a metal bracket with 2-4 screws in it (can't really remember). This releases the Bose stereo. The key to the dash removal is start from bottom up, because the topmost screws are always hidden by the panel that's just below them. So you have to hunt for the screws! The cheekiest ones are under the little rubber mat in the cubby hole. The easiest thing probably is, if you really get stuck dismantling, give me a shout and I'll help. I want to focus this write up on the tablet. Once dismantled, you'll be left with this: The more observant of you will notice a little yellow RCA peeking out, this was for my rear view camera. For £15, I seriously recommend you get one! I bloody love it. Took the dash bits into the shed to work on: And hello Nexus! I bought the tablet for £30 on eBay with a smashed screen. The eBay listing showed a nearly invisible hairline crack, but this is what I actually received!! Figures eh! Alas, I got a new screen for £20 and replaced it so I was happy in the end. Mocking up: The tablet looked pretty good in the headunit location, but I already had my headunit to go there, so had to move the tablet up top. This is where the fiddling comes in. 1. Remove the cubby from the front fascia, it's held on by 4 screws which are very easily identifiable round the back. 2. Remove the lid of the cubby, it's held on by two silvery screws on the hinge where the entire lid pivots. You'll see it. 3. Remove the cover of the lid, because this gets completely in the way when trying to close the lid over the Nexus. I wanted to be able to hide the tablet when not in use. 4. I had to dremel the top left, and top right screw holes (nearest the metal bar) otherwise the lid wouldn't close. 5. Test the tablet fit 6. The actual cubby box, was removed, but put back on. You will need to dremel the left and right sides of the cubby hole by about 2mm, and dremel the edge of the tablet by about 1mm for everything to fit in. Without this, the tablet can be forced in, but the pressure will cause the screen to bend and discolour. Don't do it. It's pretty safe to dremel the edges of the tablet, its all plastic, nothing important or electronic. 7. The tablet fits bloody well, the edges fit in perfectly, and just enough pressure to hold it so it doesn't fall out even under hard acceleration. Also, on the right hand side of the tablet, I cut a little slot for the USB, so it can be charged from the headunit. Also, arranging the tablet with the USB port to the right hand side (when looking front on) allows the power/sleep/volume buttons to be accessible on the top left. 8. You can just about see the little USB cutout above 9. So, I idiotically broke the metal bar off the plastic, and couldnt get it back on! So had to superglue, using washers and little bits of metal to hold the glue, otherwise it just dripped through the holes. Don't break this!! 10. Tablet in! I removed the cubby button as it was too big, and pointless now. So I just use that little hole to lift the lid. Pretty nice. The tablet is DEFINITELY worth installing. I use spotify on it, sync all my music when I'm in wifi range on my driveway, and then drive off! And google navigation is unbeatable in my opinion. I hate standard GPS devices. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Now for the subwoofer Currently, I have dual 12" sealed AudioBahns in the boot. Which take up the ENTIRE boot. Don't like it So started work on putting an aftermarket sub in the stock Bose location (behind the drivers seat).. The test fit looked pretty nice, so I carried on. But also at this point I realised I'd have to cut some plastic to get the sub sitting flush and proper. The sub wouldn't fit without cutting the plastic up, so here we go... Cut the a section of the bottom bit out, so the sub could fit. Also, you can see my badly made MDF ring on the floor there. But it suffices for the job at hand I used no nails glue here to seal the MDF to the metal, but also used the 4 original bolts that came off the Bose subwoofer. These will work if you sink them into the MDF by about 8-10mm. This was 18mm MDF btw. Note - DO NOT USE NO NAILS FOR THIS. The second I got the subwoofer in, and started a test playlist, the no nails cracked around the edge. It was still held on so it's fine, I just didn't like the crack. So I took it all apart, sanded everything down, cleaned all the glue and crap off. And started again using silicone sealant instead. It dried pretty strong, and the screws are there to hold it in, so the silicone does its job well as just an air seal. Took everything off, and dismantled alot more of the plastic this time so I had more room to work I spotted a can of matte black paint in the shed, so thought why not! Didn't want the MDF ring showing through the BOSE speaker grill at the end With everything done, I tested the system. It's far better than the stock BOSE for the entry level audio guy. But, the sub does not/will not drop low because the enclosure is not air tight. This location was designed for a free-air (infinite baffle) subwoofer, which mine is not. But I wanted to try this option out to see if it would suffice at all for my needs. I didn't use any form of dynamat in the back to seal the space off and make it air-tight, but the sub works fairly well without this. The reason I didn't go on and dynamat the back (which I think would make a huge difference) is because I realised that with the sub hitting at full power, I really wouldn't like that much vibration against the driving seat. So I'm moving on to the under-strut sub box option. But I'm glad I ruled this one out first. This is a cheap and easyish install for someone who wants just a touch above the BOSE. But I got rid of my BOSE in the first day, it was beyond a joke. For anyone more into their sounds, go for a sealed boot box!

@Traders: Any quotes for the Injen long tube or Takada kit?

Now that I've had my broken exhaust repaired (amongst a lot of other work from Sly @ Kaizer), I need an induction kit The exhaust is much quieter now, but has an amazingly rowdy humm, like a throaty growl which I really love. Just need more of it!! Anyone suggest or sell me a semi-decent not too expensive induction kit? Opinions/Advice welcome!!

Cabot Workshop in Walthamstow have always been pretty sick for me, worth a shout maybe

Stage 2 competition clutch and ultra-light flywheel fitted!! Feels so much more responsive and tight already! Just patiently waiting to bed it in properly before doing some full power runs

Any progress with a video??

Around £500 for clutch and fly from a well known establishment. But yeah, still frikkin cheap for the work Sly did. He's literally my new car guy, no questions asked. What sealed the deal for me, aside from that he really knew his stuff, was that as soon as a little bit of oil dropped on the floor, he'd spray it and clean it up immediately! That kinda OCD, I'd happily trust leaving my car with!

Nice!! How much did it set you back and where from? Really want an exhaust on this thing. Although, since I got it repaired, it's got such a nice low purr/growl, so much better than it was before with a broken exhaust! I was very pleasantly surprised

Haha I wanted to take them home and keep them! Completely forgot! At least they made you a good little stand lol. Would be majorly interested in hearing what it sounded like after fitting??

Rochester, just over Dartford bridge south east of London

around £650 for: Clutch/Flywheel fitting Exhaust repair MOT Full P3 service gearbox oil + molyslip Diff oil Wheel alignment Pretty frikkin good!! Can't praise Sly enough for the stuff he knows, really can't.

Just got the work done from Sly. This guy really knows his stuff!! He had no issue with me standing by, asking all the questions that came to mind and he'd answer them more than happily! The amount of awards he has from Nissan really does speak for itself. photos:

Needed a new clutch and flywheel because mine was slipping. Ewen happily answered all my newbie queries about what a dual-mass flywheel is, and which clutch could work with which flywheels, and engine types! Ended up taking the stage 2 competition clutch and lightened flywheel that was on offer at the time, really couldn't find a deal to beat it! So ended up taking it Literally arrived the next day! You are now my new parts man

Booking in with Sly @KaizerMotors. He's going to do the entire job plus a service. Looking forward to seeing some GTRs lying around at his place!

If it hadn't have failed MOT, I would not be inclined to repair the exhaust! It sounds amazing! forgive my utter noobness - you mean ebay or the for sale section here?